JVC CA-D5T User Manual

CAUTION: If there is a power failure, the clock loses its setting. The display shows “0:00", and the
clock must be reset.
Setting the DAILY Timer
= of co ot
With this timer you can wake up to music from a CD, tape or your favourite radio program.
{) You can set the DAILY Timer whether the Unit is on or off.
Procedure For Setting the DAILY Timer
The DAILY Timer is used to set the various settings, from the Timer ON setting to the Volume level.
Use the <4 or 4 buttons to select each setting then press the SET button to complete the setting.
To correct any errors in the setting, press the STOP/CANCEL Mi button, and go back through the
settings until you reach the Timer ON setting.
The kd, m1, SET and STOP/CANCEL m@buttons blink if they can be used in a particular setting.
When the SET button is pressed, the settings for the next item are displayed on the display.
7. Press the TIMER button and so that “DAILY Timer” appears in the display.
The message “DAILY” blinks on the display and the DAILY indicator light blinks.
Q The display changes with each press of the button, as shown below.
DAILY (blinks) -> ON TIME (blinks) > ONCE REC (blinks) > ON TIME (blinks) > CLOCK
(blinks) (Clock setting mode) -> original display before the TIMER button was pressed ->
to the beginning)
2. Press the TIMER button again.
The display changes to the blinking “DAILY” or a blinking display of the Timer ON setting.
aa 8 ede
The “OFF TIME” hour setting starts to blink
after the “ON TIME” minute setting is set.
4, Set the time you want the Unit to turn off.
5. Select the source you want to listen to.
When CD is selected.
© SUURIE ama
When TAPE, FM or AM are selected.
So UUIE "ma
eo gm fs
=
yn
z=)
co
Lid

JVC CA-D5T Specifications

General

Brand	JVC
Model	CA-D5T
Category	Stereo System
Language	English