18
Playing Back a Tape
To insert a tape
You can play back type I tapes.
• The use of C-120 or longer tape is not recommended.
To change the tape running direction
(deck B only)
To reverse the tape automatically
(deck B only)
To playback the both decks A and B continuously
—Relay Play
When the cassettes are set in the both decks...
After the tape in deck A finishes playing, the tape in deck B
starts playing.
After the reverse (2
) side of the tape in deck B finishes
playing, the tape in the deck A rewinds and then starts
playing.
To start:
To stop:
To rewind tape:
Before or after play...
INFO
Rewinds the tape to the right.
Rewinds the tape to the left.
Tape is automatically reversed, and playback
repeats until you stop it.
Tape will not be reversed. When the current
side of the tape reaches its end, playback stops.
Tape is automatically reversed once.
3 (forward)
2 (reverse)
Main Unit
ONLY
REVERSE
MODE
REVERSE
MODE
MX-JD5&8[UX].book Page 18 Monday, April 26, 2004 2:22 PM
To Next Page
Loading...
Need help?
General
