JVC CA-MXJD8 User Manual

23
Setting the Clock
Without setting the built-in clock, you cannot use Daily/
Recording Timers (see page 40) and Sleep Timer (see next
column).
• To exit from the clock setting, press CLOCK/TIMER as
required.
• To go back to the previous step, press CANCEL/DEMO.
1
Activate clock setting mode.
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2 Adjust the hour.
3
Adjust the minute.
Now the built-in clock starts working.
To check the current time during play
Turning Off the Power Automatically
With Sleep Timer, you can fall asleep listening to music.
1
Specify the time (in minutes).
2
Wait until the set time goes off.
To check the time remaining until the shut-off time
INFO
Main Unit
ONLY
CLOCK
/
TIMER
SET
/
DISPLAY
PRESET
SET
/
DISPLAY
PRESET
SET
/
DISPLAY
Clock
Source information
2 sec.
• If you press repeatedly, you can change the
shut-off time.
Remote
ONLY
SLEEP 10 SLEEP 20 SLEEP 30 SLEEP 60
SLEEP 90SLEEP 120
Canceled
SLEEP
MX-JD5&8[UX].book Page 23 Monday, April 26, 2004 2:22 PM

JVC CA-MXJD8 Specifications

General

Brand	JVC
Model	CA-MXJD8
Category	Speaker System
Language	English