29
Basic operations of disc/file playback
■ When a disc/file is played back
Press 4 or ¢ repeatedly.
NOTE
• You cannot skip to the previous track even by
pressing 4 during random playback. (Refer to
page 33.)
• You can also select a title or group. (1) Slide the
remote control mode selector to [SHIFT], (2)
press [GROUP/TITLE], and then (3) use the
number buttons to enter the desired title or
group number while “_ _” is displayed in the dis-
play window. At this time, for a DVD VR, the
“PG” or “PL” indicator lights up in the display
window.
■ When a disc/file is played back
Use the number buttons to select the
chapter number or track number.
NOTE
• To cancel the PBC function for VCD/SVCD, refer
to page 24.
You can skip within a file at approximately 5 minute
intervals. This is useful especially when you want
to skip within a long file.
■ When a disc/file is played back
Press 2 or 3 (cursor).
• Each time you press 2 or 3 (cursor), the play-
back position skips to the beginning of the previ-
ous or next interval. Each interval is
approximately 5 minutes.
NOTE
• Intervals are automatically assigned from the
beginning of a file.
• You can use this function only within the same
file.
Skipping to the beginning of
a chapter/track/file
Selecting a chapter/track
using the number buttons
(PBC off)
Skipping at approximately 5
minute intervals
Basic operations of disc/file playback (continued)
NX-F3_NX-F7[US].book Page 29 Friday, February 15, 2008 4:50 PM
To Next Page
