3
Getting Started
Step 1: Unpack
After unpacking, check to be sure that you have all the
following items. The number in parentheses indicates the
quantity of each piece supplied.
• FM antenna (1)
• AM loop antenna (1)
• Remote control (1)
• Batteries (2)
If any item is missing, consult your dealer immediately.
Step 2: Prepare the Remote Control
Insert the batteries into the remote control by matching the
polarity (+ and –) correctly.
• If the range or effectiveness of the remote control
decreases, replace both batteries.
FM
COAXL
75Ω
AM
LOOP
AM EXT
ANTENNA
Step 1:Unpack the package and
check the accessories.
Step 2: Prepare the remote control.
Step 3: Connect the AM/FM antennas
and speakers (see pages 4
and 5).
Finally plug the AC power cord.
Now you can operate the System.
3
2
1
R03(UM-4)/AAA(24F)
UX-G200[J].BOOK Page 3 Tuesday, December 2, 2008 3:05 PM
To Next Page
Loading...
