5
Basic and Common Operations
NOTE
DO NOT turn off (standby) the System with the volume
set to an extremely high level; Otherwise, the sudden
blast of sound can damage your hearing, speakers and/or
headphones when you turn on the System or start
playback.
Using Headphones
Be sure to turn down the
volume before connecting
or wearing the headphones.
• Connecting the headphones
will deactivate the speakers.
Operating on the System
To Press
Turn on or off
(standby) the power
The standby lamp on the System turns off /on.
Select a source*
See “Playing Back Discs” on page 7.
See “Listening to the Radio” on page 9.
See “Connecting a Portable Audio Device”
on page 13.
Adjust the volume
You can adjust the volume level from level 0
(VOL MIN) to level 31 (VOL MAX).
Display Information
Disc play mode indicators (See page 8.)
Tuner mode indicators
(See page 9 and 12.)
Timer mode indicators
(See page 6 and 15.)
QP Link indicator
(See page 13.)
Main Display
AHB PRO and A.STBY indicator (See page 6.)
STANDBY lamp
* You can operate the source select buttons on the
System only touch lightly, because these buttons are
“touch sensor panel.”
If you touch any one of these buttons, they lights in
orange briefl y.
EN_01_20_UX-NB7DAB[B]ff.indd 5EN_01_20_UX-NB7DAB[B]ff.indd 5 06.7.6 11:27:06 AM06.7.6 11:27:06 AM
To Next Page
Loading...
