JVC COMPU LINK RX-305TN

— Before Operating —
Before
plugging
the
power
cord
into
an
AC
outlet,
check
to
be
sure
the
individual
components
are
connected
correctly.
4
1. Turn the POWER switch to ON.
POWER
ON/STANDBY
Note:
lf a malfunction occurs when the power is ON, unplug the power
cord and then plug it in again.
2. Select aspeaker system by pressing one of the SPEAKERS keys.
1 SPEAKERS 2
ON, OFF
Note: x
If speakers are not connected to both SPEAKERS 1 and 2 terminals,
do not turn ON both speaker systems as that would suppress sound
output.
3. Operate these keys, as needed, by following the directions given
further on.
oo co ew an TAPES < ua >
WoO
4. Adjust the VOLUME and BALANCE keys to your taste.
"10 VOLUME
°5
ny
< VOUME > io
tL BALANCE R
Note:
These keys vary their settings while they are being pressed.
_ BALANCE
Ls |
5. Adjust the TREBLE and BASS knobs for desired sound.
6.Press the LOUDNESS and MUTE keys as needed.
®
Press
to
make
up
for
loss
of
the
human
auditory
sensation
when
the
sound
volume
is
low.
LOUDNESS
LOUDNESS
®@ Press to temporarily cancel sound output.
Mt) 7 Co
Pro) fF 7b
MUTE
Note:
The MUTE key is reset when the VOLUME or BALAN'E keys are
pressed.