MENU SETTINGS
EN 51
MENU SETTINGS
MasterPage: Menu_Right
[ ] = Factory-preset
[FINE] / STANDARD
Select the desired image quality.
[2560 x 1920] / 2048 x 1536 / 1600 x 1200 /
1280 x 960 / 640 x 480
Select the desired image size.
NOTE:
In 2560 x 1920 mode, the data is converted and
stored in its file size.
[OFF] / 2SEC / 10SEC
By setting the self-timer, a still image is recorded
2 or 10 seconds after pressing recording start/
stop button. The or indicator appears.
[AUTO] / 100 / 200 / 400
Select the ISO sensitivity to the desired setting.
When set to [AUTO], the sensitivity automatically
increases in dark conditions.
NOTE:
The amount of image noise increases as the setting
level increases.
CAMERA SETTING
The menu item of TELE MACRO is the same as in
the description on page 50.
[ ] = Factory-preset
墌 “DPOF Print Setting” (墌 pg. 46)
墌 “Direct Printing with a PictBridge Printer”
(
墌 pg. 47)
墌 “Playback Effects” (墌 pg. 37)
The menu items of PROTECT and DELETE are the
same as in the description on page 50.
[ ] = Factory-preset
Select the desired sound quality.
[ HIGH]/ MIDDLE / LOW
Select the desired voice recording level.
The menu item of WIND CUT is the same as in the
description on page 50.
[ ] = Factory-preset
Select the desired voice playback speed.
[ NORMAL]: Normal speed
FASTPLAY: Playback speed is 20% faster
than normal speed.
SLOWPLAY: Playback speed is 20% slower
than normal speed.
The menu items of PROTECT and DELETE are the
same as in the description on page 50.
Still Image Recording Menus
QUALITY
IMAGE SIZE
SELF-TIMER
GAIN
TELE MACRO
Still Image Playback Menus
DPOF
DIRECT PRINT
EFFECT
PROTECT
DELETE
Voice Recording Menus
QUALITY
Mode
(In order of the
quality)
Recording
mode
Bit rate
[ FINE] 48 kHz 1,536 kbps
STANDARD 16 kHz 512 kbps
ECONOMY 8 kHz 256 kbps
RECORDING
LEVEL
WIND CUT
Voice Playback Menus
PLAYBACK
SPEED
PROTECT
DELETE
GZ-MC500PAL.book Page 51 Wednesday, April 13, 2005 7:44 PM
To Next Page
Loading...
