Why is the projected image from my JVC DLA-HD1 dark?
A dark projected image from your JVC Projector may be due to the lamp nearing exhaustion. Check the lamp time in the information menu and prepare to replace the lamp unit as soon as possible.
How to resolve a fuzzy video image on my JVC Projector?
If the video image on your JVC Projector is fuzzy: * Adjust the focus using the focus adjustment ring. * Ensure the unit is placed at the correct distance from the screen.
What to do if color does not appear correctly on JVC DLA-HD1 Projector?
If the color on your JVC Projector does not appear or looks strange, adjust the Color and Tint settings in the setting menu.
What to do if the video image does not appear on my JVC Projector?
If the video image doesn't appear on your JVC Projector, consider these potential causes: * Ensure the lens cap is removed. * Verify that the correct external input is selected. * Check that the AV device is properly connected and powered on, playing video, and outputting the correct signals. * Confirm that the input terminal settings (COMP and HDMI) in the setting menu match the input signal. * Make sure the video image is not temporarily hidden by pressing the [HIDE] button.
Why is my JVC Projector remote control not working?
If your JVC Projector remote control isn't working, check the following: * Ensure the batteries are correctly installed, matching the polarities (+ or -). * Replace exhausted batteries with new ones. * Remove any objects obstructing the path between the remote control and the remote sensor. * Make sure you are holding the remote control close enough to the sensor.
How to fix JVC DLA-HD1 when power is not supplied?
If your JVC Projector is not receiving power: * Ensure the power cord is firmly inserted. * If the unit is in standby mode, remove the power plug, properly close the lamp cover, and then re-insert the plug. * If the lamp is in Cool Down mode, wait until it completes before turning the power on again.
Why does my JVC Projector stop abruptly after a few minutes?
If your JVC Projector turns on but stops abruptly after a few minutes, the possible causes are: * Blocked air inlets and exhaust vent. Remove the power plug when the unit is in standby mode and remove any blocking object. After that, insert the plug again. * Dirty filter. Clean the filter.
General| Projection distance | 3.0/6.1 m |
|---|---|
| Projection technology | DLP |
| Contrast ratio (typical) | - |
| Digital zoom | 2 x |
| Focal length range | 21.3 - 42.6 mm |
| Lamp type | UHP |
| Lamp power | 200 W |
| Light source type | Lamp |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 455 x 172.5 x 418.5 mm |
| Connectivity technology | Wired |
| Full HD | Yes |
| Serial interface type | RS-232 |
| Power consumption (standby) | 2.7 W |
| Market positioning | Home cinema |
Weight and Dimensions| Weight | 11600 g |
|---|
To Next Page
