JVC DLA-HD100 - User Manual

Getting Started Preparation Basic Operation Settings Troubleshooting Others
LCT2342-001A
D-ILA PROJECTOR
PROJECTEUR D-ILA
PROYECTOR D-ILA
INSTRUCTIONS
MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUCCIONES
For Customer use :
Enter below the serial No. which is
located on the bottom side of the
cabinet. Retain this information for
future reference.
Model No. DLA-HD100
Serial No.
Pour utilisation par le client :
Entrer ci-dessous le N° de série qui
est situé sous le boîtier. Garder
cette information comme référence
pour le futur.
N° de modèle DLA-HD100
N° de série
Instrucción para el cliente :
Introduzca a continuación el nº de
serie que aparece en la parte
inferior lateral de la caja. Conserve
esta información como referencia
para uso ulterior.
Modelo Nº DLA-HD100
Nº de serie
DLA-HD100
ENGLISH FRANÇAIS ESPAÑOL
DLA-HD100U_EN.book Page 1 Friday, October 12, 2007 5:14 PM

JVC DLA-HD100 Specifications

General

Projection technology	DLP
Lamp power	200 W
Light source type	Lamp
Focal length range	21.3 - 42.6 mm
Full HD	Yes
Serial interface type	RS-232
S-Video inputs quantity	1
Dimensions (WxDxH)	455 x 418.5 x 172.5 mm
Noise level	24 dB
Power consumption (standby)	2.7 W
Power consumption (typical)	280 W
Market positioning	Home cinema

Weight and Dimensions

Weight	11600 g

Summary

Safety Precautions

Important Information

Describes mercury content in the lamp and environmental disposal considerations.

Warnings and Cautions

Covers fire, electric shock hazards, earthing requirements, and service cautions.

FCC Compliance

Details US FCC rules for digital devices and potential radio frequency interference.

General Safety Guidelines

Outlines essential safety rules for operating and servicing the projector to prevent hazards.

Power Connection Safety

Plug Suitability and Modifications

Addresses using correct plugs and avoiding modifications to prevent shock hazards.

Earthing Requirements

Emphasizes the necessity of earthing the apparatus for electrical safety.

Wire Color Coding and Connections

Explains how to connect power cord wires based on standard color coding.

Remote Control Operation Details

Image Quality and Aspect Ratio Adjustments

Explains settings for screen size, image profile, contrast, brightness, and color.

Remote Control Usage and Range

Effective Operating Range

Connecting External Devices

Device Connection Ports

Video Cable Connections

Component Video Cable Setup

Digital and Conversion Cable Connections

HDMI Cable Connection

Projector and Screen Installation

Lens Shift Range Explained

Adjusting Image Position and Size

Screen Size and Projection Distance Chart

Provides a table correlating screen sizes with projection distances.

Projecting Your First Image

Powering On and Lens Cap Removal

Selecting Input and Playing Source

Adjusting Image Position, Size, and Focus

Covers fine-tuning the projected image position, size (zoom), and focus.

Image Adjustment and Power Off Procedures

Fine-Tuning Focus and Zoom

Explains how to adjust focus and image size precisely using the remote control.

Projection Features and Screen Setup

Setting the Screen Size (Aspect Ratio)

Understanding the Setting Menu

Example: Changing Aspect Ratio

Image Adjustments and Color Temperature Settings

Image Adjust Parameters

Details settings for Contrast, Brightness, Color, Tint, Sharpness, and DNR.

Color Temperature Options

Gamma and Color Adjustment

Gamma Setting Options

Gamma Curve Adjustment

Details how to adjust gamma curves for specific colors (R, G, B) or overall.

Image Offset and Pixel Adjustments

Pixel Adjust for Fine Color Shifts

Picture Position and HDMI Input Level

HDMI Input Level Settings

Aspect Ratio, V-Stretch, and Resize Settings

Aspect Ratio Configuration (SD Video)

Customizing Projected Images

Changing Default Image Profile Values

Adjusts quality settings like contrast, brightness, color, and sharpness for profiles.

Registering User-Defined Image Profiles

Adjusting Image Quality for Profiles

Saving User-Defined Profiles

Troubleshooting Common Issues

Power Supply Problems

Addresses lack of power, lamp issues, and abrupt stops after power on.

Projected Image Issues

Covers scenarios like dark projected images or the unit stopping abruptly.

Video Image Display Problems

Deals with missing images, incorrect input selection, and color display issues.

Advanced Troubleshooting Scenarios

Fuzzy or Missing Video Images

Solutions for fuzzy focus, incorrect placement, and screen masking issues.

Remote Control Malfunctions

Troubleshooting Error Messages

Handling No Input and Out of Range Messages

Explains how to resolve input signal errors like 'No Input' or 'Out of Range'.

Responding to Lamp Replacement Warnings

Details messages related to lamp life, indicating replacement is needed.

Understanding Warning Indicators

Indicator Status and Meanings

Lists lamp and warning indicator states and their corresponding causes.

Actions for Warning Mode

Provides step-by-step procedures to follow when the unit enters a warning mode.

Replacing the Lamp Unit

Safety Precautions for Lamp Replacement

Emphasizes unplugging the unit and allowing cooling before replacing the lamp.

Procedure for Lamp Replacement

Step-by-step guide detailing how to remove the old lamp unit.

Usable Lamp Life Information

Details expected lamp lifespan, purchasing information, and replacement indicators.

Installing New Lamp and Cover

Installing the New Lamp Unit

Covers inserting the new lamp unit correctly and tightening its screws.

Attaching the Lamp Cover

Details how to properly reattach the lamp cover after the lamp has been replaced.

Resetting Lamp Time After Replacement

Procedure for Resetting Lamp Time

Step-by-step instructions using the remote control to reset the lamp timer.

Cleaning and Replacing the Filter

Filter Removal and Cleaning Steps

Guides on how to remove, wash, dry, and clean the projector's inner filter.

Filter Replacement and Handling

Advises on when to replace the filter and precautions for handling it.

RS-232 C Interface Specifications

RS-232 C Pinout and Signals

Command Format Structure

RS-232 C Command and Data Reference

Operating Commands and Data

Lists commands for power supply, input selection, gamma table, and test patterns.

RS-232 C Reference Commands

Reference Commands for Power and Input

Gamma and Test Pattern Reference Commands

RS-232 C Remote Control Codes

Remote Control Button to Binary Code Mapping

Provides a lookup table mapping remote control buttons to their binary codes.

RS-232 C Communication Examples

Example: Connection Check and Power Commands

Example: Input and Gamma Table Commands

Unit Mounting and Precautions

Mounting Procedures and Screw Requirements

Details how to mount the unit on a pedestal or ceiling and screw specifications.

Mounting Environment and Tilt Precautions

Product Specifications

General Product Information

Lists product name, model, panel size, projection lens, lamp, and screen size.

Input Formats and Power Requirements

PC Compatible Signals and Dimensions

PC Signal Timing Specifications