JVC DLA-HD100 - Projecting Your First Image; Powering On and Lens Cap Removal; Selecting Input and Playing Source; Adjusting Image Position, Size, and Focus

20
3
Basic Operation
Projecting Image
......................................................................
.
Preparation
z Remove the lens cap.
A Insert the power plug to the power outlet
B Turn on the power
C Project the image
a Select input mode
b Play back the selected device
D Adjust the position of the projection screen
E Adjust the image size (zoom) and the focus
a Display the test pattern (crosshatch)
This section describes the basic operations to project input images on the screen.
z You can also press the [STANDBY/ON] button on the unit to turn on the
power. (pP11)
z You can also select the input mode by pressing the [INPUT] button on
the unit. (pP11)
z See “Installing the Projector and Screen” for procedures on adjusting the
position. (pP18)
PROJECTOR
OPERATE
LIGHTTEST
EXIT
SHARP
-
SHARP
+
USER
2
S-VIDEOVIDEO ASPECT
HDMI 2
OFF
........ ........
HDMI 1 COMP.
N
NATURALCINEMA DYNAMIC
COLOR
TEMP
GAMMA
USER
3
D
COLOR
-
COLOR
+
USER
1
C
CONTRAST
BRIGHT
HIDE
INFO
MENU
ENTER
ON
WARNING
LAMP
STANDBY/ON
A
B
Light on (Red)
Power Cord
(Supplied)
A Connect to this unit
B Connect to the power outlet
A STANDBY/ON
ON
Light on (Green)
A STANDBY/ON
COMP.HDMI 2HDMI 1
VIDEO S-VIDEO
TEST
Press repeatedly
DLA-HD100U_EN.book Page 20 Friday, October 12, 2007 5:14 PM