To Next PageTo Next PageHow to fix JVC Projector when power is not supplied?
If your JVC Projector is not receiving power: * Ensure the power cord is firmly inserted. * If the unit is in standby mode, remove the power plug, properly close the lamp cover, and then re-insert the plug. * If the lamp is in Cool Down mode, wait until it is complete before turning the power on again.
Why is the video image on my JVC DLA-HD350 Projector fuzzy?
If the video image on your JVC Projector appears fuzzy, try these solutions: * Adjust the focus until the image is clear. * Ensure the projector is placed at the correct distance from the screen.
Why is the projected image from my JVC Projector dark?
If the projected image from your JVC Projector is dark, it might be because the lamp is near exhaustion. Check the lamp time in the information menu and prepare to replace the lamp unit as soon as possible.
What to do if video image does not appear on my JVC Projector?
If the video image does not appear on your JVC Projector, consider the following: * Ensure the correct external input is selected. * Verify the AV device is properly connected and powered on, and that it is playing video. * Check that the correct signals are being output from the AV device and that the input terminal setting is correct. * Confirm the video image is not temporarily hidden by pressing the [HIDE] button.
Why does my JVC DLA-HD350 remote control not work?
If your JVC Projector remote control isn't working, check these possible causes: 1. Ensure the batteries are installed with the correct polarities (+ and -). 2. Replace the batteries with new ones if they are exhausted. 3. Remove any objects obstructing the path between the remote control and the remote sensor. 4. Make sure you are holding the remote control close enough to the sensor.
What to do if JVC DLA-HD350 Projector stops abruptly after a few minutes?
If your JVC Projector stops abruptly after running for a few minutes: * Remove the power plug when the unit is in standby mode and ensure that the air inlets and exhaust vent are not blocked. Then, re-insert the plug. * Clean the filter.
Why does the color not appear correctly on my JVC Projector?
If the color on your JVC Projector does not appear correctly, adjust the “Color” and “Tint” settings in the setting menu.
Why image cannot output by HDMI terminal on JVC DLA-HD350?
If the image cannot output by the HDMI terminal on your JVC Projector, set up the “Control with HDMI” function to “Off”.
General| Projection technology | DLP |
|---|---|
| Contrast ratio (typical) | - |
| Aspect ratio | 16:9 |
| RS-232 ports | 1 |
| Dimensions (WxDxH) | 365 x 478 x 167 mm |
| Focal length range | 21.4 - 42.8 mm |
| Full HD | Yes |
| Serial interface type | RS-232 |
| Noise level | 19 dB |
| Power consumption (standby) | 1 W |
| Power consumption (typical) | 280 W |
| Market positioning | Home cinema |
Weight and Dimensions| Weight | 11000 g |
|---|
Important safety information regarding projector placement to prevent hazards.
Guidelines for safely connecting the projector to the power supply and replacing fuses.
Covers angle, shift adjustment, and screen size/distance.
Outlines the process from power connection to image focus and adjustment.
Covers adjusting Picture Mode, Contrast, Brightness, Color, Tint, Color Temp, Gamma, Advanced.
Addresses power, image display, fuzzy images, and connectivity problems.
Explains message displays, warning lights, and actions for warning modes.
Covers lamp replacement procedure and resetting lamp time.
