To Next PageTo Next PageWhy does my JVC DLA-X90R Projector remote control not work?
If your JVC Projector's remote control isn't working, first ensure the batteries are correctly installed, matching the + and - polarities. If that doesn't work, replace the batteries with new ones. Also, make sure there's nothing blocking the path between the remote and the projector's sensor. Finally, try moving closer to the projector while using the remote.
What to do if the video image does not appear on my JVC DLA-X90R?
If your JVC Projector doesn't show a video image, ensure that you've selected the correct external input. Check that the A9 device is properly connected and powered on, and that it's outputting the correct signals. Also, verify that the input terminal settings ('COMP.' and 'HDMI') in the setting menu match your input signal. Finally, press the [HIDE] button to ensure the video image isn't temporarily hidden.
How to troubleshoot power issues with my JVC DLA-X90R Projector?
If your JVC Projector is not getting power, make sure the power cord is firmly plugged in. Also, check that the lamp cover is properly shut; if not, remove the power plug while in standby mode, close the lamp cover, and then reinsert the plug. Finally, if the projector is in Cool Down mode, wait for it to complete before turning the power on again.
General| Resolution | 1920 x 1080 |
|---|---|
| Lens Shift | Vertical: ±80%, Horizontal: ±34% |
| Throw Ratio | 1.4 - 2.8:1 |
| 3D | Yes |
| Display Technology | D-ILA |
| Native Resolution | 1920 x 1080 |
| Projection Size | 60 - 200 inches |
| Contrast Ratio | 100, 000:1 |
| Projection Technology | D-ILA |
| Zoom Ratio | 2:1 |
| Inputs | 2x HDMI, 1x Component, 1x Composite |
| Lamp Type | UHP |
Important warnings, FCC compliance, installation place, and general safeguards for safe operation.
Step-by-step guide for connecting the projector's power cord safely.
Step-by-step guide for basic projector operations, including power, input, zoom, and focus.
Overview of menu structure, operation buttons, procedures, and item descriptions.
Adjusting video image content, modes, gamma, and color settings.
Configuring HDMI, PC, and 3D input signal specifications.
Procedure for replacing the projector's lamp unit and information on lamp life.
Procedures for resetting the lamp time via menu or remote control.
Instructions for cleaning or replacing the projector's air filters.
Solutions for common problems like power loss, no image, and fuzzy video.
Explanation of common messages and their causes/solutions.
