How to fix JVC UHD TV when it has no power?
If your JVC UHD TV isn't turning on, first ensure the power cord is securely plugged into the outlet. Next, verify that the power isn't off by pressing the Power button on the TV. If it still doesn't work, try plugging the TV into a different outlet. As a last resort, unplug the TV for an hour and then plug it back in.
Why is there no sound on my JVC UHD TV?
If you are experiencing poor or no sound on your JVC UHD TV, first, try adjusting the volume by pressing the VOL+ button on the remote or the TV itself. Make sure the mute function is not enabled by pressing the MUTE button on the remote. If the issue persists, try tuning to another channel to rule out channel-specific problems. Also, check the TV's audio settings and look for any potential sources of interference.
How to troubleshoot JVC UHD TV remote control not working?
If your JVC UHD TV remote control isn't working, aim the remote directly at the remote sensor on the TV, keeping the angle within 35 degrees. Ensure there are no obstructions between the remote and the TV. If you're still having issues, try moving closer to the TV. Check that the LED indicator lights up when you press any button, and replace the batteries if needed, ensuring they are correctly inserted.
What to do if my JVC UHD TV has poor or no picture?
If you're experiencing poor or no picture on your JVC UHD TV, try tuning to another channel to rule out channel-specific issues. Ensure that channels are properly set into the TV's memory. Check the connections for your antenna or cable TV. Finally, check for any potential sources of interference.
General| Resolution | 3840 x 2160 (4K UHD) |
|---|---|
| Smart TV | Yes |
| Refresh Rate | 60Hz |
| Operating System | Android TV |
| Display Technology | LED |
| HDR Support | HDR10 |
| Audio Output | 20W (2 x 10W) |
| Wi-Fi | Yes |
| Bluetooth | Yes |
To Next Page
