To Next PageTo Next Page
Need help?Do you have a question about the JVC DR-MV1S and is the answer not in the manual?
General| Type | DVD Recorder |
|---|---|
| Recordable Media | DVD-R, DVD-RW, DVD+R, DVD+RW |
| Video System | NTSC |
| Progressive Scan | Yes |
| Remote Control | Yes |
| Recording Format | MPEG-2 |
| Hard Drive | No |
| USB Port | No |
| DVD Recording Modes | SP, LP, EP |
| Connectors Front | S-Video |
| Connectors Rear | Component, Composite, S-Video, Optical Audio, Coaxial Audio |
| Audio Output | Stereo |
General safety guidelines, warnings about voltage, and laser product warnings.
Crucial notes on preventing electric shock, fire hazards, and proper installation.
Step-by-step guide for connecting the unit to a TV and other equipment.
Automatic setup process for channels, clock, and program numbers.
Downloading TV/Auto Clock Set and Auto Guide Program Number.
Setting up the unit to control a satellite receiver for channel selection.
Playing back recorded content while recording is still in progress.
Detailed explanation of the Live Memory Playback feature.
Restricting playback of content based on set levels and passwords.
Explains recording quality modes and resuming recording.
Programming recordings directly onto specific discs for daily/weekly use.
Automatically recording satellite programs based on receiver timer settings.
Step-by-step guide to playing video cassettes.
Step-by-step guide for recording onto VCR tapes.
Easy timer recording with automatic shut-off.
Simplified timer recording using program codes.
Setting timer recordings manually by date, time, and channel.
Introduction to searching and selecting programs using the DVD Navi.
Copying entire cassettes from VCR to DVD.
Dubbing selected scenes from VCR tape to DVD.
Copying entire discs from DVD to VCR tape.
Dubbing selected scenes from DVD disc to VCR tape.
Dubbing video from camcorders or DV equipment via DV cable.
Connecting satellite receivers for signal reception.
Setting guide program numbers, auto channel scan, and tuner settings.
Configuring the SHOWVIEW system for accurate programming.
Setting the unit's clock manually or automatically via Just Clock.
Preparing DVD-RAM/RW discs for recording or erasing data.
Making DVD-R/RW discs playable on standard DVD players and cancelling finalisation.
Common problems related to power, remote control, connections, and basic operation.
Troubleshooting playback problems specific to the DVD deck.
Troubleshooting common playback and recording problems with the VCR deck.
Troubleshooting common recording problems with the DVD deck.
Common issues related to timer recording for both decks.
