To Next PageTo Next Page
Need help?Do you have a question about the JVC DX-E55 and is the answer not in the manual?
General| Tuner Bands | FM/AM |
|---|---|
| CD Player | Yes |
| Tape Deck | Yes |
| Cassette Deck | Yes |
| Speakers | 2-way Bass Reflex Speakers |
| Tuner | Digital |
Safety measures for handling laser products to prevent exposure to radiation.
Unit powers on and starts playback by pressing a source button.
Operates CD/tuner, controls power, volume, sound, and Active Hyper-Bass Pro.
CD player with program, repeat, and random play functions.
Advanced cassette mechanism for reliable operation.
Tuner with 30-station preset capability (15 FM, 15 AM).
Circuit for enhanced low-frequency sound reproduction.
Sleep timer can be set for up to 2 hours.
Switch to eliminate beat interference.
Guidelines to prevent electric shock, fire, and damage to the unit and surroundings.
Avoid direct sunlight, high temperatures, and specific installation locations.
Keep dust away from lenses and handle condensation by waiting.
Adjust volume carefully and be aware of safety mechanisms.
Keep unit away from speakers/TVs, clean cabinet, and use headphones safely.
Ensure all connections are completed before switching on power.
Connect speaker cords, ensuring correct polarity for black wire.
Connect the AC power cord after all other connections are made.
Use specified car adapter for DC 12V operation, connect to DC IN jack.
Identifies and describes controls for the CD player and general unit functions.
Details the buttons for tape playback, rewind, stop, and fast forward.
Describes buttons for mode selection, tuning, and presets.
Explains indicators for tape mode, recording, playback, band, frequency, and presets.
Details the FM antenna, DC IN 12V, and AC IN jacks.
Identifies speaker terminals and the Beat Cut switch.
Instructions for installing and replacing batteries in the remote control.
Tips on pointing the remote, range, and avoiding light interference for effective operation.
Details the functions of various buttons on the remote control.
How to turn the unit on from standby mode.
How to put the unit into standby mode.
How to start playback and select source by pressing buttons when the unit is in standby.
How to use the VOLUME buttons to increase or decrease volume.
How to turn the Active Hyper-Bass Pro feature on or off.
Explains how to select preset sound modes (BEAT, POP, CLEAR, FLAT).
Information on usable discs, handling, and storage to prevent damage.
Instructions on how to clean discs properly to avoid damage.
Step-by-step guide to playing a full CD, including loading and starting playback.
How to stop playback in the middle of a disc or temporarily pause it.
How to skip forward to the next tune or backward to previous tunes.
Using fast-forward/reverse search to find exact spots on the disc.
How to start playback from a specific track using remote control buttons.
How to program up to 20 tracks for playback using the unit's buttons.
Displays programmed tracks and their order after setting.
How to erase programmed tracks from the unit or remote control.
How to program tracks using the remote control unit.
How to select single tune or all tunes repeat playback using the PLAY MODE button or REPEAT button.
How to select random playback mode using the PLAY MODE button or RANDOM button.
Notes on programmed time limits and CD synchro recording.
How to tighten loose tape and protect tapes from accidental erasure.
Step-by-step guide to loading a cassette tape into the unit.
How to load a cassette and start playback.
Steps to turn on the tuner, select band (FM/AM), and tune to stations.
Instructions on extending and positioning FM and AM antennas for best reception.
Select Auto mode for stereo reception or Mono mode for noisy reception.
Automatically tunes to the next available station by pressing buttons.
Manually tune to stations by pressing buttons in steps.
Troubleshooting tips for seek tuning and memory recall.
Scans and stores up to 15 stations per band automatically.
Steps to tune to a station and assign it to a preset memory location.
How to preset stations using the remote control buttons.
Notes on overwriting presets, AM noise, and power failure erasure.
Steps to tune and preset stations using the unit's buttons.
Steps to tune and preset stations using the remote control.
Explains ALC circuit optimizes recording level automatically.
Reminds user to check the safety tab on the cassette.
Step-by-step guide for recording audio from a CD to a cassette synchronously.
Notes on button functionality during synchro recording and copyright warnings.
Steps for recording radio broadcasts onto a cassette.
Explains the Beat Cut switch for eliminating beats during AM recording.
How to erase a cassette tape without making a new recording.
How to set the sleep timer using the remote control for tapes, radio, or CDs.
How to check remaining sleep time or cancel the timer operation.
Explains why cleaning heads, capstan, and rollers is important for sound quality.
Instructions for cleaning the heads, capstan, and pinch roller.
Warnings about keeping magnets away from heads and using appropriate cleaning agents.
Addresses issues with powering on the unit or hearing sound from speakers.
Troubleshooting steps for CD playback issues like no play or partial playback.
Solutions for low sound from cassette and noisy radio reception.
Troubleshooting for sleep timer and remote control operation problems.
Recommends performing a test recording before important recordings.
Technical details of the CD player section, including type, signal detection, and frequency response.
Technical details of the radio section, including frequency ranges and antennas.
Technical details of the tape deck, including track system, motor, heads, and frequency response.
Overall specifications like power output, dimensions, mass, and accessories.
Technical details of the speakers, including size, impedance, dimensions, and mass.
