30
Menu item Selectable setting/item
Device Menu
Phone Connect*
4
/
Audio Connect*
4
Only for the registered devices.
Select a device from among the registered devices, establish the connection
with it.
Phone Disconnect*
4
/
Audio Disconnect*
4
Only for the device being connected.
Disconnect the current device before connecting another device.
Delete Pairing Only for the registered devices.
Touch [Yes] to confirm deleting the registered devices.
New Pairing Preparation:
• Operate the Bluetooth device to turn on its Bluetooth function.
1 Enter a PIN (Personal Identification Number) *
5
.
• You can enter any number you like (1-digit to 16-digit number).
[BS]: Erases the last character.
[Enter]: Confirms the entry.
2 Operate the Bluetooth device to connect while “Open...” is displayed on
the screen.
Enter the same PIN code (as entered in the above step) on the device to
be connected.
Now connection is established and you can use the device through the unit.
• The device remains registered even after you disconnect the device. Use
<Phone Connect>/<Audio Connect> (or activate <Auto Connect>,
31) to connect the same device from next time.
*
4
When a device is not connected to the unit, <Phone Connect> and <Audio Connect> appear. When a device
has already been connected to the unit, <Phone Disconnect> and <Audio Disconnect> appear.
EN_KDAVX7755[A]f.indb 30EN_KDAVX7755[A]f.indb 30 09.4.3 4:47:38 PM09.4.3 4:47:38 PM
To Next Page
Loading...
