41OPERATIONS
  Operations using the 
on-screen bar
 (DVD-Video/DVD-VR/DivX/MPEG1/MPEG2/
JPEG/VCD)
These operations are possible on the monitor using the 
remote controller.
1  Show the on-screen bar. (   42)
•  The on-screen bar is not displayed fully under 
some <Aspect> settings. ( 
 15)
2  Select an item.
3  Make a selection.
  If pop-up menu appears...
•  To cancel pop-up menu, press RETURN.
•  For entering time/numbers, see the following.
Entering time/numbers
Press % / fi to change the number, then press @ / # to 
move to the next entry.
•  Each time you press % / fi, the number increases/
decreases by one value.
•  After entering the numbers, press ENT (enter).
•  It is not required to enter the zero and tailing zeros 
(the last two digits in the example below).
Ex.: Time search
DVD: _:_ _:_ _ (Ex.: 1:02:00)
Press % once, then # twice to go to the third entry, % 
twice, then press ENT (enter).
Removing the on-screen bar
(twice)
• For DivX/MPEG1/MPEG2/JPEG/MP3/WMA/WAV/AAC, 
track is searched within the same folder.
•  For DVD-VR, program/playlist search is possible 
during Original program playback (PG)/Playlist 
playback (PL).
•  To erase a misentry, press CLR (clear) while holding 
SHIFT.
Using menu driven features
•  DVD Video
1  Press TOP M/MENU to enter the menu screen.
2 Press % / fi / @ / # to select an item you want to 
start play.
3  Press ENT (enter) to confirm.
•  DVD-VR
1  Press TOP M to enter the Original Program.
  Press MENU to enter the Playlist.
2 Press % / fi / @ / # to select an item you want to 
start play.
3  Press ENT (enter) to confirm.
•  Original Program/Playlist screen,   59.
•  VCD
1  While holding SHIFT, press DIRECT to enter the 
search mode.
2  While holding SHIFT, press the number buttons (0 
– 9) to enter the desired number.
3  Press ENT (enter) to confirm.
•  To return to the previous screen, press RETURN.
Canceling the PBC playback (VCD)
1 Press  , then press DIRECT while holding SHIFT.
2  While holding SHIFT, press the number buttons 
(0 – 9) to enter the desired number.
3  Press ENT (enter) to confirm.
•  To resume PBC, press TOP M/MENU.
EN_KDAVX7755[A]f.indb   41EN_KDAVX7755[A]f.indb   41 09.4.3   4:47:43 PM09.4.3   4:47:43 PM