JVC FS-GD7 - Radio Tuning and Presets; Selecting Bands and Tuning Stations; Improving FM Reception Quality; Storing and Recalling Radio Presets

(No.MB355)1-15
3.1.8 Removing the fan
(See Fig.22 to 24)
• Prior to performing the following procedure, remove the side
panel (R)/(L), the top panel.
(1) From top of the body, disconnect the wire from connector
CN205
on the amp board.
(2) From the back of the body, remove the five screws Q at-
taching the rear cover.
(3) From the back of the body, remove the four screws U at-
taching the fan.
Fig.22
Fig.23
Fig.24
Rear panel
Tuner pack
Rear cover
Fan
Main board
CN401
Amp board
CN205
Rear panel
Raer cover
Q
Q
Q
Q
Fan
Rear cover
U
U
U
U