JVC FS-GD7 - Basic Disc Playback Procedures; Disc Structure and Playback Controls; Inserting, Selecting, and Resuming Discs; On-Screen Guide Icon Interpretation

1-16 (No.MB355)
3.1.9 Removing the main board
(See Fig.25, 26)
• Prior to performing the following procedure, remove the side
panel (R)/ (L), the top panel and the rear cover/ rear panel.
(1) Disconnect the card wire from connector CN501 and
CN502
on the main board and disconnect the wire from
connector CN402
.
(2) From the right side of the body, remove the two screws Y
attaching the main board.
(3) Pull and disconnect connector CN403
and CN404 on the
main board from the amp board. Disconnect connector
CN601
on the main board from the front panel assembly
backward.
Fig.25
Fig.26
Front panel assembly
CN601
CN501
CN502
CN403
CN404
CN402
Main board
Y
Y
CN502
Main board
CN402
Front panel assembly
CN601
CN501
CN403
CN404