JVC FS-GD7 - Advanced Disc Playback Features; Locating Content and Using Disc Menus; 3 D Phonic Sound and Special Effects

(No.MB355)1-17
3.1.10 Removing the power cord
(See Fig.27)
• Prior to performing the following procedure, remove the side
panel (R)/ (L), the top panel and the rear cover/ rear panel.
(1) Disconnect the wire from connector CN901
on the power
(single) board.
(2) Pull the power cord stopper out in the direction of the arrow
and remove it from the base chassis.
Fig.27
Base chassis
Power cord
Power cord stopper
CN902
Power (single) board
CN901