EasyManua.ls Logo

JVC GET0686-001A - User Manual

JVC GET0686-001A
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
ENGLISH
ESPAÑOL
FRANÇAIS
GET0686-001A
[J]
KD-HDR44
CD RECEIVER / RECEPTOR CON CD /
RÉCEPTEUR CD
For canceling the display demonstration, see page 4. / Para
cancelar la demostración en pantalla, consulte la página 4. / Pour
annuler la démonstration des affichages, référez-vous à la page 4.
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information
for future reference.
Model No.
Serial No.
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l’installation et les raccordements, se référer au manuel séparé.
CoverRear_KD-HDR44[J]_3.indd 1-2 10/28/10 10:13:22 AM

Other manuals for JVC GET0686-001A

Questions and Answers

  • D
    Debra FowlerAug 30, 2025
    What does “NO DISC” mean on JVC GET0686-001A Car Receiver?
    • S
      Scott WarnerAug 30, 2025
      If “NO DISC” appears on the display of your JVC Car Receiver, insert a playable disc into the loading slot.
  • J
    Jennifer RosalesAug 29, 2025
    How to fix if “AM” cannot be selected on JVC GET0686-001A?
    • S
      Sean ThompsonAug 29, 2025
      If “AM” cannot be selected on your JVC Car Receiver, check the = setting.
  • M
    Ms. Rachel BishopAug 28, 2025
    Why CD-R or CD-RW cannot be played back and track cannot be skipped on JVC Car Receiver?
    • A
      abigail32Aug 28, 2025
      If a CD-R/CD-RW cannot be played back and track cannot be skipped on your JVC Car Receiver, insert a finalized CD-R/CD-RW (finalize with the component which you used for recording).
  • D
    Derek WheelerAug 27, 2025
    How to fix sound quality changes when receiving HD Radio stations on JVC GET0686-001A?
    • T
      Theodore EllisonAug 27, 2025
      If the sound quality changes when receiving HD Radio stations on your JVC Car Receiver, fix the reception mode either to .
  • K
    Kelsey BlackAug 27, 2025
    What to do if “MISWIRING CHK WIRING THEN RESET UNIT” or “WARNING CHK WIRING THEN RESET UNIT” appears on the display of my JVC GET0686-001A?
    • J
      Joshua MillerAug 27, 2025
      If the message “MISWIRING CHK WIRING THEN RESET UNIT” or “WARNING CHK WIRING THEN RESET UNIT” appears on the display of your JVC Car Receiver, check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit. If the message does not disappear, no answer.
  • J
    Joseph BrownAug 25, 2025
    Why is there no sound coming from my JVC GET0686-001A speakers?
    • Z
      Zachary BurgessAug 26, 2025
      If you cannot hear any sound from the speakers, first, make sure that the volume is at an audible level. Then, verify that the unit is not muted or paused. Finally, check all cords and connections to ensure they are properly connected.
  • R
    Robert MorganAug 25, 2025
    What to do if the disc sound is sometimes interrupted on JVC GET0686-001A?
    • M
      Matthew SampsonAug 25, 2025
      If the disc sound on your JVC Car Receiver is sometimes interrupted, stop playback while driving on rough roads. You can also try changing the disc. Also check the cords and connections.

JVC GET0686-001A Specifications

General IconGeneral
ModelGET0686-001A
CategoryCar Receiver
BrandJVC
TunerAM/FM
Supported MediaUSB
Output Power50W x 4 Channels
DisplayLCD
Audio FeaturesEqualizer
ConnectivityUSB, AUX

Related product manuals