JVC GR-45 - Playback Operation; Playback Preparation Steps; Adjusting Playback Tracking

PLAYBACK
The GR-45E permits playback of recorded VHS-C video cassettes
For connections refer to pages 19 and 20.
Preparation
•Set the aerial select switch of the RF-V3E RF
unit to VIDEO and the TV receiver's channel
selector to your video channel (specified AV
channel).
Connect a power supply unit. (Battery or AC opera¬
tion: see page 5.)
Slide the POWER switch to ON.
Insert a pre-recorded cassette.
First remove tape slack, then insert the cassette
correctly. See page 3.
Press the PLAY button. Playback will start.
•The SP/LP switch may be in either position.
The SP or LP mode recording is automatically
detected and played back at a correct speed
respectively.
•When the end of the tape is reached during
playback, the Rewind mode engages auto-
matically.
Tracking adjustment
If noise bars appear on the screen, adjust the
TRACKING control. Turn it slowly in either
direction to minimize noise bars. After play¬
ing a particular tape, return the TRACKING
control to the center position.