EasyManua.ls Logo

JVC GR-AX210U - Page 34

JVC GR-AX210U
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
A
B
C
IN OUT 
ç© 1 0:00:25 
© 2
© 3
© 4
© 5
© 6
© 7
© 8
COUNTER 0:00:25 
TOTAL 0:00:00
IN OUT 
ç
© 1 0:00:25 0:01:05
© 2 0:03:18 0:03:31
© 3 0:02:33 0:02:53
© 4 0:04:11 
© 5 
© 6
© 7
© 8
COUNTER 0:04:11 
TOTAL 0:01:13
EDITING (cont.)
PREPARE CAMCORDER
2
Insert a recorded tape and set the power switch to
PLAY.
PREPARE VCR
3
Turn the power on, insert a recordable tape and
engage the AUX mode (refer to VCR’s instructions).
SELECT SCENES
ACCESS R.A. EDIT COUNTER
DISPLAY
1
Press PLAY/PAUSE, then press R.A. EDIT and the
counter display appears in the viewfinder and the
screen of the connected TV.
REGISTER BEGINNING OF SCENE
2
Press REW or FF to locate the beginning of a scene
you want, then press IN/OUT to register that point.
The data appears under IN on the display.
REGISTER END OF SCENE
3
Press REW or FF to locate the end of the scene and
press IN/OUT to register it. The data appears under
OUT on the display. The total time of the registered
scene(s) is displayed at the bottom of the screen.
REGISTER ADDITIONAL SCENES
4
Repeat steps 2 and 3 for each additional scene
(as many as 8).
MAKE CORRECTIONS
5
Press CANCEL during steps 2 and 3 to erase the
most recently registered point.
NOTES:
There must be at least one second between an in-point
and its corresponding out-point.
The camcorder prerolls during R.A. Edit, so there must
be at least 15 seconds of recording material prior to
any in-point.
Blank portions of tape cannot be registered as in-points
or out-points.
If it takes more than 5 minutes to search for an in-point,
the VCR’s Record-Pause mode is cancelled and editing
doesn’t take place.
Pressing R.A.EDIT clears all in- and out-points from
memory.
Leave a small margin for error around each in-point to
ensure the scene is recorded in its entirety.
VCR REC STBY
RM-V700U (optional)
IN/OUT
PLAY/PAUSE
STOP
R.A. EDIT
CANCELREW/FF
To AUDIO and
VIDEO out
connector
To EDIT
Audio and Video
cable (optional)
Editing cable
(optional 3.5 ø
mini-plug cable)
VCR (Recording deck)
To Remote
PAUSE
To AUDIO and
VIDEO IN
connectors
To Pause-In
Downloaded from: https://www.usersmanualguide.com/

Related product manuals