JVC GR-D370AH - Editing; Dubbing to a VCR

EN 43
MasterPage: Start_Right
ADVANCED FEATURES
EDITING
1Yellow to VIDEO IN
2Red to AUDIO R IN*
3White to AUDIO L IN*
4To S-VIDEO IN (Connect when your TV/VCR
has an S-VIDEO IN connector. In this case, it
is not necessary to connect the yellow video
cable).
* Not required for watching still images only.
NOTE:
The S-Video cable is optional. Be sure to use the
YTU94146A S-Video cable. Consult the JVC
Service Sentre described on the sheet included in
the package for details on its availability. Make sure
to connect the end with a core filter to the camera.
The core filter reduces interference.
1 Following the illustrations, connect the
camcorder and the VCR’s input connectors.
2 Start playback on the camcorder. ( pg. 23)
3 At the point you want to start dubbing, start
recording on the VCR. (Refer to the VCR’s
instruction manual.)
4 To stop dubbing, stop recording on the VCR,
then stop playback on the camcorder.
NOTES:
● It is recommended to use the AC Adapter as
the power supply instead of the battery pack.
(
 pg. 15)
● To choose whether or not the following displays
appear on the connected TV
• Date/time
Set “DATE/TIME” to “ON” or “OFF”.
(
 pg. 32, 36) Or, press DISPLAY on the
remote control to turn on/off the date indication.
• Time code
Set “TIME CODE” to “OFF” or “ON”.
(
 pg. 32, 36)
• Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/
TV”. ( pg. 32, 36)
NOTE:
Dubbing To A VCR
2
4
1
3
Audio/Video
cable
(provided)
To AV
connector
To S connector
S Cable
(optional)
TV
VCR
GR-D370AH_EN.book Page 43 Monday, April 17, 2006 2:24 PM