JVC GR-D50 - Provided Accessories; How to Attach the Lens Cap

EN
5
NOTE:
In order to maintain optimum performance of the camcorder, provided cables may be equipped with one or more core
filter. If a cable has only one core filter, the end that is closest to the filter should be connected to the camcorder.
Audio/Video Cable
(ø3.5 mini-plug to
RCA plug)
Shoulder Strap
USB Cable
(GR-D50/D40 only)
Battery Pack BN-V408U
AC Adapter AP-V11E or AP-V13E
Lens Cap
(See below for
attachment)
PROVIDED ACCESSORIES
CD-ROM
(GR-D50/D40 only)
Power Cord
Cable Adapter
Remote
Control Unit*
RM-V718U
Lithium Battery*
CR2025
(for remote
control unit)
To protect the lens, attach the provided lens cap to the camcorder as shown in the illustration.
NOTE:
To confirm the lens cap is on correctly make sure the cap is flush to the camera.
HOW TO ATTACH THE LENS CAP
1 Make sure the arrow ( ▲ ) is
pointing upward.
Arrow
23
Core Filter x 2 (for
optional S-Video Cable
and Editing Cable
provided with Remote
Control kit RM-V717KITU
墌 pg. 6 for attachment)
9
0
2
3
4
6
we
5
T
W
None
2
3
4
11
Pull out by inserting
a pointed instrument
into the slot.
Slot
* A battery is pre-installed in the Remote Control Unit
a time of shipment (with insulation sheet). To use the
Remote Control Unit, remove the insulation sheet.
or
01 D50/40/30/20EK 01-10 02.12.13, 9:215