JVC GR-DF470

GETTING STARTED
16 EN
The language on the display can be changed.
(墌 pg. 37, 40, 42)
1 Set the Power Switch to “M” while pressing
down the Lock Button located on the switch.
2 Open the LCD monitor fully. (墌 pg. 19)
3 Press MENU. The Menu Screen appears.
4 Press or to select
“n”, and press SET. The
CAMERA DISPLAY Menu
appears.
5 Press or to select
“LANGUAGE”, and press
SET.
6 Press or to select
the desired language, and
press SET.
7 Press or to select
“BRETURN”, and press
SET twice. The Menu
Screen closes.
The date/time is recorded onto the tape at all
times, but its display can be turned on or off
during playback. (墌 pg. 37, 42)
1 Perform steps 1 – 4 in “Language Settings”
above.
2 Press or to select “CLOCK ADJ.”, and
press SET. The parameter for “Day” is
highlighted.
3 Press or to input
the day, and press SET.
Repeat to input the month,
year, hour and minute.
4 Press or to select
“BRETURN”, and press
SET twice. The Menu
Screen closes.
1 Adjust the velcro strip.
2 Pass your right hand
through the loop and grasp
the grip.
3 Adjust your thumb and
fingers through the grip to
easily operate the
Recording Start/Stop
Button, Power Switch and
Power Zoom Lever. Be
sure to fasten the velcro strip to your preference.
1 Set the Power Switch to “A” or “M” while
pressing down the Lock Button located on the
switch.
2 Make sure the LCD monitor is closed and
locked. Pull out the viewfinder fully and adjust it
manually for best viewability.
3 Turn the Dioptre Adjustment Control until the
indications in the viewfinder are clearly focused.
CAUTION:
When retracting the viewfinder, take care not to
pinch your fingers.
Language Settings
Date/Time Settings
ON
D
–OLEV.AU
NRETUR
LA DASERA CM I YP
BRIGHT
LC – T/D
AU
MET
–/TI DA E
OT
OF
DEM
– CO TI E
F
V
–
2
O
K CL C
I
210.
J
AD .
7
1
. 0 5
:30
NCREON S E
LANGUAGE ENGLISH
LA DASERA CM I YP
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
NEDERLANDS
PORTUGUÊS
РУССКИЙ
LANGUAGE
–
ex. for GR-DF570/
470
LA
D
ASERA CM
I
Y
P
2
O
K CL C 210.
J
AD .
7
1
. 0 5
:30
Grip Adjustment
Viewfinder Adjustment
PAUSE
Dioptre Adjustment Control
Example: