62
EN
USING THE REMOTE CONTROL UNIT
+
–
+
–
1
2
3
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible.
Installing The Batteries
The remote control uses two “AAA (R03)” size
batteries. See “General Battery Precautions”
( pg. 89).
1 Remove the battery compartment cover while
pushing up the tab as illustrated.
2 Insert two “AAA (R03)” size batteries in the
correct direction.
3 Re-attach the battery compartment cover.
When using the remote control,
be sure to point it at the remote
sensor. The transmitted beam’s
approximate effective area for
indoor use is 5 m.
The transmitted beam may not be
effective or may cause incorrect
operation outdoors or when the
remote sensor is directly exposed
to sunlight or powerful lighting.
Remote sensor
Tab
Insert the minus (–) end first.
Infrared beam
transmitting
window
(
pg. 63)
To Next Page
Loading...
Need help?
General
