Operation Mode
Turning the Power Switch and Shooting Mode Dial allows
you to choose the appropriate operation mode from
among the following table and the one on pg. 15:
According to the Power Switch position you
have selected, “F.AUTO” or “MANUAL”
appears in the upper left corner.
To turn on the camcorder, first set the Power
Switch to any operation mode except “OFF”,
then pull out the viewfinder fully or open the
LCD monitor fully. When setting the Power
Switch, press and hold the Lock Button.
When set to “ ”
When set to “
”
Power Switch
If the Power Switch is set to “ ” or
“ ”, these indications do not appear.
Lock Button
Power lamp
GETTING STARTED
(cont.)
Function
Allows you to set various
recording functions using the
Menus. If you want more creative
capabilities than Full Auto
recording, try this mode.
Allows you to record using NO
special effects or manual
adjustments. Suitable for standard
recording.
Allows you to switch off the
camcorder.
Allows you to play back a
recording on the tape or to
transfer a still image recorded on
the tape or in the
MultiMediaCard to a computer.
Allows you to display an image
stored in the MultiMediaCard.
Power Switch
Position
Manual:
Full Auto:
OFF
To Next Page
Loading...
Need help?
General
