JVC GR-DVL9800 - Adjusting VCR;Camcorder Timing; Setting Synchronization Timing

EN77
1
S
1
S
A
R
O
2
Y
V
E
U
B
N
/
V
T
N
I
C
S
I
U
D
T
H
–
D
R
R
C
V
E
N
M
S
O
O
I
O
O
O
P
D
D
U
Y
E
M
E
N
O
E
D
NU
+
1 . 0
ADJUSTMENT OF VCR/CAMCORDER
TIMING
4
Point the remote control at the camcorder’s remote
sensor and press R.A.EDIT ON/OFF to make the
Random Assemble Editing menu disappear, then
press MENU/BRIGHT. The Menu Screen appears.
5
Rotate MENU/BRIGHT to select “ ” and press it.
“VIDEO MENU” appears. Then, rotate it to
“SYNCHRO” and press it. The value for “SYNCHRO”
is highlighted.
6
Based on the diagnostics performed (Z pg. 76), you
can now advance the VCR’s record timing by rotating
MENU/BRIGHT towards “+”. You can also delay the
VCR’s record timing by rotating MENU/BRIGHT
towards “–”. The adjustment range is from –1.3 to
+1.3 seconds, in 0.1-second increments.
Press MENU/BRIGHT to finish the setting.
7
Rotate MENU/BRIGHT to select “ 1 RETURN” and
press it twice.
Now perform Random Assemble Editing beginning
with step 4 on page 74.
NOTES:
● Before performing actual Random Assemble Editing, do
a few Random Assemble Editing trial runs to check
whether the value you have input is appropriate or not,
and make adjustments accordingly.
● Depending on the recorder, there may be situations
where the timing difference cannot be fully corrected.
Display
MENU/BRIGHT Dial
VCR
(Recording deck)
TV
GR-DVL9800
only