JVC GR-DVM5 User Manual

16 EN
1
2
3
GETTING STARTED (Cont.)
Grip Strap Attachment
1
ATTACH GRIP STRAP TO HAND
STRAP EYELET
Open the pad and pull the grip strap in the
direction of the arrow to remove the grip strap
from the pad.
Thread the end of the grip strap through the
hand strap eyelet, then thread the other end of
the grip through the loop. Pull firmly to ensure
secure attachment.
•To use the strap as a hand strap, thread the
strap through the length adjuster when
attaching it to the camcorder.
Hand strap eyelet
Grip Strap
Sub hand
strap eyelet
START/STOP
Loop
Pad
Bottom of
camcorder
Length adjuster
Pad
2
ATTACH GRIP STRAP TO SUB
HAND STRAP EYELET
Open the pad and thread the grip strap through
the pad. Next, thread the end of the grip strap
through the sub hand strap eyelet.
3
ADJUST LENGTH
Adjust so that your thumb and fingers can
easily operate the START/STOP button and the
zoom switch 1. Position the pad so that it
contacts the back of your hand and thread the
grip strap through the length adjuster 2, then
re-attach the pad 3.

JVC GR-DVM5 Specifications

General

Brand	JVC
Model	GR-DVM5
Category	Camcorder
Language	English