JVC GR-DVM70 User Manual

] 6E.
LoadingAMuifiMediaCard
CONFIRM POWER-OFF STATUS
Make sure tile camcorder's power is off.
OPEN THE CARD COVER
iNSERT THE MULTiMEDIACARD
Insert the MultiMedia( ard terminal end first with tile
label t\lcing up (see the illustration on the left).
• Do not touch the terminal.
CLOSE THE CARD COVER
If the card is nrlt installed properly, the card cover
cannot be closed.
NOTES:
• Be sur_ to use only MultiMediaCard_ marl_ed
"MultiMediaCard'.
• Some bmnrg ofMu/tiMedJiaCarJ_ ard not con'}patib/e with
this camcorde,: Bef_)r(_pur_ hasing a MultiMediaG_rd,
CI_F}SH/tits tY}aF}U_lCtHr_r OFd]da/dll
Unl0adin9 A MultiMediaCard
The MultJMedJa(ard retains images in its memrlry even
after it has been removed from the camcorder.
CONFIRM POWER-OFF STATUS
Make sure the camcorder's power is off.
OPEN THE CARD COVER
REMOVE THE MULTiMEDiACARD
Press ELECT. The MultiMedia( ard is disengaged from
the camcorder.
CLOSE THE CARD COVER
![CT
ATTENTION:
Dr) not insert/remove the MultiMedia( ard while tile
camcorder is turned r)n, as this may cause tile
MultiMediaCard to be corrupted or cause the
camcorder to become unable to recognize whether r)r
not the card is installed.

JVC GR-DVM70 Specifications

General

Brand	JVC
Model	GR-DVM70
Category	Camcorder
Language	English