JVC GR-FXM38 - User Manual

1
INSTRUCTIONS ENGLISH LYT0860-001B
AUTOMATIC DEMONSTRATION
Automatic Demonstration takes place when “DEMO MODE” is set to “ON”
(factory-preset).
•Available when the Power Switch @ is set to “ ” or “ ”.
•Performing any operation during the demonstration stops the demonstration temporarily. If no operation
is performed for more than 1 minute after that, the demonstration will resume.
•“DEMO MODE” remains “ON” even if the camcorder power is turned off.
•To cancel Automatic Demonstration, set the Power Switch
@ to “ ” and press the MENU Wheel 1 in
while the demo is in progress. This takes you directly to the demo mode’s Setting Menu (so you will not
have to go through the main Menu Screen). Rotate the MENU Wheel
1 to select “OFF” and press it.
NOTES:
•When a tape whose Erase Protection tab is in the position that allows recording is loaded in the
camcorder, demonstration is not available.
•If you do not detach the Lens Cap, you cannot see the actual changes of the Automatic Demonstration
activated on the LCD monitor* or viewfinder.
* Applicable models only.
Dear Customer,
Thank you for purchasing the JVC Compact VHS camcorder. Before use, please read
“PRECAUTIONS” (
 pg. 3, 4) to ensure safe use of this product.
EG
Printed in Malaysia
1001MKV
*
UN
*
PJ
COMPACT VHS CAMCORDER
GR-SXM58
GR-SXM48
GR-FXM383
GR-FXM38
GR-SX24
GR-FX14
VHS
PAL
625
S-VHS is compatible with
GR-SXM58/SXM48/SX24
only
COPYRIGHT© 2001 VICTOR COMPANY OF JAPAN, LTD
Downloaded From VideoCamera-Manual.com Manuals

JVC GR-FXM38 Specifications

General

Optical Zoom	16x
Digital Zoom	700x
Image Sensor	CCD
Image Sensor Size	1/4 inch
Focus	Auto / Manual
Screen Size	2.5 inches
Zoom	16x optical zoom / 700x digital zoom
LCD Screen	2.5" color LCD monitor

Summary

PRECAUTIONS AND SAFETY

GENERAL SAFETY WARNINGS

Critical warnings about fire, shock hazards, and avoiding rain or moisture.

OPERATIONAL CAUTIONS

Guidelines for safe operation, handling, and preventing damage from misuse.

GETTING STARTED AND BASIC OPERATIONS

BATTERY CHARGING AND AC POWER

Instructions for charging the battery pack and using AC power for the camcorder.

CONTROLS, CONNECTORS, AND INDICATORS

EXTERNAL CAMCORDER LAYOUT

DISPLAY AND VIEWFINDER INFORMATION

RECORDING AND PLAYBACK PROCEDURES

RECORDING VIDEO CONTENT

Step-by-step guide for recording video, including viewfinder/LCD use and brightness.

PLAYBACK OF RECORDED TAPES

How to load a tape and use playback controls to view recorded content.

MENU SETTINGS AND CONFIGURATION

CAMERA MENU: FOCUS AND EXPOSURE

Adjusting focus manually and controlling exposure for optimal image capture.

SYSTEM MENU: RECORDING MODES

Configuring REC MODE, D. ZOOM, WIDE, and S-VHS ET for recording quality.

TROUBLESHOOTING AND WARNINGS

COMMON OPERATIONAL PROBLEMS

Addresses issues like white lines, bright spots, and playback interruptions.

WARNING INDICATIONS AND ERRORS

Explains battery, tape, condensation, and error code indicators for user guidance.

SAFETY, CARE, AND MAINTENANCE

VIDEO LIGHT SAFETY DANGERS

Critical safety warnings regarding the video light's heat and proper usage to prevent injury.

BATTERY PACK CARE AND USAGE

MAIN UNIT SAFETY AND HANDLING

Essential safety rules for the camcorder unit, including not opening or exposing it to hazards.

UNIT CARE AND MAINTENANCE

ENVIRONMENTAL AND USAGE CAUTIONS

MOISTURE CONDENSATION AND MALFUNCTIONS

Explains condensation phenomena, causes, and steps for serious malfunctions.