EN31
1
Load a tape (Z pg. 10).
2
Set the Power Switch to “PLAY”. To start playback,
press
4
/6.
•To stop playback, press 5.
•Press
2
to rewind, or
3
to fast-forward the tape
during Stop mode.
NOTES:
●
The camcorder shuts off automatically after about
5 minutes in Stop mode. To turn on again, set the Power
Switch to “OFF”, then to “PLAY”.
●
The playback picture can be viewed in the viewfinder or
on a connected TV (
Z
pg. 34, 35).
●
If a blank portion on the tape is played back, the screen
may become black. This is not a malfunction.
PLAYBACK
Basic Playback
Rewind (
2
) Button
Fast-Forward (
3
) Button
Play/Pause (
4
/6) Button
Stop (5) Button
Set to “PLAY”.
Still Playback: Pauses during playback.
1) Press
4
/6 during playback.
2) To resume normal playback, press
4
/6 again.
●
Noise bars will appear and the picture will become
monochrome during Still Playback.
Shuttle Search: Allows high-speed search in either
direction.
1) Press
3
for forward or
2
for reverse search during
playback.
2) To resume normal playback, press
4
/6.
●
During playback, press and hold
2
or
3
. The search
continues as long as you hold the button. Once you
release it, normal playback resumes.
●
Noise bars appear and pictures may become mono-
chrome or darken during Shuttle Search. This is normal.
To Next Page
Loading...
