JVC GR-SXM277UA - Page 25

(No.YF016)1-7
3.2.2 ASSEMBLY/DISASSEMBLY OF CABINET PARTS AND ELECTRICAL PARTS
zDisassembly procedure
NOTE 5 :
Take care not to break or damage the FRAME.
NOTE 7a :
Take care not to cut the FPC wire.
NOTE 7b :
Insert and attach the SHEET(FPC) between the MONITOR
FPC and the UPPER CASE(M)ASSEMBLY.
NOTE 7c :
Attachment of the FPC
NOTE 7d :
For disassembly of the MONITOR ASSEMBLY, refer to 2.4
ASSEMBLY AND DISASSEMBLY OF [7]MONITOR AS-
SEMBLY (CABINET PARTS).
NOTE 8a :
Take care not to damage the OP BLOCK ASSEMBLY when
and after the FRONT CASE ASSEMBLY is removed.
NOTE 8b :
Attachment of the WIRE
zDestination of connectors
STEP
No.
PART NAME
Fig.
No.
POINT NOTE
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
LOWER CASE ASSEMBLY
B/W VF ASSEMBLY
TOP OPE UNIT(S)
TOP OPE UNIT(M)
CASE COVER(S) ASSEMBLY
CASE COVER(M) ASSEMBLY
UPPER CASE(S) ASSEMBLY
UPPER CASE(M) ASSEMBLY
Inc. MONITOR ASSEMBLY
COVER (UPPER/M) ASSEMBLY
MONITOR ASSEMBLY
FRONT COVER ASSEMBLY
Inc. DC LIGHT,MIC
DC LIGHT ASSEMBLY
MIC
FRONT FRAME SA
8(S1),CN1a,b,c
3(S2)
CN3,(S3),(L3a),(L3b),2(L3d)
CN3,(S3),(L3a),(L3b),(L3c),2(L3d)
(S4),2(L4)
6(S5a),(S5b),(L5)
CN5,6(S5a),(S5b)
3(S6)
S7a,L7,SHEET(FPC),2(S7b)
CN8a,CN8b,(S8),L8a,L8b
2(L9)
S10
2(S11)
Fig.C1
Fig.C2
Fig.C3
Fig.C4
Fig.C5
-
-
-
-
NOTE 5
-
NOTE 7a,b,c,d
NOTE 8a,b
-
-
-
CN.NO.
CONNECTOR
PIN
NO.
CN1a MAIN CN27 SPEAKER - 2
CN1b MAIN CN13 ZOOM UNIT - 14
CN1c MAIN CN12 B/W VF ASSEMBLY - 3
CN3 MAIN CN18 TOP OPE UNIT - 13
CN5 MAIN CN16
MONITOR ASSEMBLY CN7601 25
CN8a MAIN CN6 DC LIGHT - 2
CN8b MAIN CN8 MIC - 2