JVC GVT0182-005A - Turning On;Off the System; Adjusting the Volume; Temporarily Turning off the Sound (FADE MUTING); Emphasizing Bass Sound (AHB PRO)

9
Basic Operations and Settings
Press .
• While the System is turned off, pressing one of
the buttons below also turns on the System.
Remote control:
Main unit:
The corresponding source will be selected by
pressing one of these buttons except .
Playback automatically starts if the selected
source is ready.
Press .
NOTE
• You can also adjust the volume by turning the
VOLUME control on the main unit.
• You can adjust the volume within the range of “0” to
“40”.
Press .
• "FADE MUTING" appears on the display window
and the volume will be set to minimum.
• To restore the sound, press again.
Press .
• Each time you press , the AHB PRO (Active
Hyper Bass PRO) function changes between
"AHB PRO ON" (initial setting) and "AHB PRO
OFF."
• When the AHB PRO function is activated,
lights on the display window.
Sound mode
A combination of JVC sound technologies
enables you to select the desired sound pattern.
Press repeatedly.
• Each time you press , the display changes as
follows:
• When the sound mode is set to an item other
than "SOUND MODE NORMAL," lights
on the display window.
NOTE
• When α SOUND is activated ( page 10), using
the SOUND MODE cancels
α SOUND
automatically and vice versa.
• This function does not affect recording sound.
Turning On/Off the System
Adjusting the Volume
Temporarily Turning Off the
Sound (FADE MUTING)
Emphasizing Bass Sound
(AHB PRO)
Sound Mode
: For lively sound.
: For energetic sound.
: For soulful sound.
: For vibrant sound.
: Cancels the sound
mode (initial setting).
UX-QX3W_A[A].book Page 9 Friday, July 21, 2006 4:37 PM