Why no picture is displayed on the TV screen, the picture is blurred, or the picture is divided into two parts on JVC Stereo System?
If no picture is displayed on the TV screen, the picture is blurred, or the picture is divided into two parts when using your JVC Stereo System, it means that the system is connected to a TV which does not support progressive video input.
Why the disc does not play on JVC Stereo System?
If the disc does not play on your JVC Stereo System, it could be due to an incorrect Region Code (resulting in a “RG ERROR” message) or because the disc is placed upside down. Ensure the disc's Region Code is correct for your system. If the Region Code is corect, place the disc with the label side up.
Why is it hard to hear broadcasts because of noise on JVC Stereo System?
If you're having trouble hearing broadcasts clearly on your JVC Stereo System due to noise, check the antenna connections to ensure they are correctly connected and not loose. Also, make sure the AM loop antenna is not too close to the system and that the FM antenna is properly extended and positioned.
What to do if no sound is heard from JVC Stereo System?
If no sound is heard from your JVC Stereo System, check the speaker connections to ensure they are correct and secure. Also, verify that headphones are not connected to the system, as this may mute the speakers.
Why the cassette holder cannot be opened on JVC Stereo System?
If the cassette holder on your JVC Stereo System cannot be opened, it might be because the power supply from the AC power cord was cut off while the tape was running. Turn on the system to resolve this issue.
Why ID3 Tag on an MP3/WMA/WAV file cannot be shown, groups and tracks are not played back as I expect on JVC UX-G68?
If ID3 Tag on an MP3/WMA/WAV file cannot be shown, and groups and tracks are not played back as you expect on your JVC Stereo System, it is because the playing order is determined when the groups and tracks were recorded, depending on the writing application.
Why no subtitle appears on the display though I have selected the initial subtitle language on JVC UX-G68 Stereo System?
If no subtitle appears on the display of your JVC Stereo System, even after selecting the initial subtitle language, it may be because some DVDs are programmed to always display no subtitle initially. If this happens, press SUBTITLE after starting playback.
Why audio language is different from the one I have selected as the initial audio language on JVC UX-G68 Stereo System?
If the audio language is different from the one you selected as the initial audio language on your JVC Stereo System, it may be because some DVDs are programmed to always use the original language initially. If this happens, press AUDIO/MPX after starting playback.
Why adjustments or settings are suddenly canceled before I finish on JVC UX-G68?
If adjustments or settings on your JVC Stereo System are suddenly canceled before you finish, it is because there is a time limit. Repeat the procedure again.
Why MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2, ASF or DivX files are not played back on JVC UX-G68 Stereo System?
If MP3, WMA, WAV, JPEG, MPEG-1, MPEG-2, ASF, or DivX files are not playing back on your JVC Stereo System, it could be because the disc or USB mass storage device contains different types of files (e.g., MP3/WMA/WAV and JPEG). In this case, you can only play back the files selected by the “FILE TYPE” setting. Alternatively, if you changed the “FILE TYPE” setting after the system read the disc or USB device, reload the disc or disconnect and reconnect the USB device.
General| Impedance | 6 Ω |
|---|---|
| RMS rated power | 60 W |
| Signal-to-Noise Ratio (SNR) | 89 dB |
| Type | Home audio micro system |
| Cassette deck | Yes |
| Volume control | Digital |
| Supported radio bands | AM, FM |
| Speakers | 3-Way, Bass-Reflex |
| Media types supported | MP3, WMA, WAV, JPEG, MPEG-4 (ASF) |
| USB 2.0 ports quantity | 1 |
Weight and Dimensions| Weight | 5700 g |
|---|---|
| Center speaker weight | 2800 g |
| Center speaker dimensions (WxDxH) | 166 x 232 x 250 mm |
Important safety precautions for laser product operation and handling.
General warnings regarding electrical shock, fire hazards, and moisture.
Specific placement advice for adequate ventilation to prevent overheating.
General safety and operational advice for installing and using the system.
Instructions on connecting and handling the AC power cord.
Detailed steps for connecting AM and FM antennas.
Instructions for correctly connecting the speakers to the unit.
Connecting TVs, monitors, and other component devices.
Steps to power on the system and activate sources.
How to choose the input source for playback.
How to select titles or groups on a disc or file.
How to select specific chapters or tracks for playback.
Directly selecting titles, chapters, or tracks via remote.
Playing audio from connected portable devices.
How to activate the Quick Portable Link feature.
How to adjust the main volume level.
Using features to improve sound quality.
Creating a 3-dimensional sound field effect.
Selecting video scanning modes for TV output.
Adjusting picture settings like brightness and contrast.
Choosing audio languages or channels on discs.
Selecting the desired subtitle language.
Choosing different camera angles for scenes.
Using slow-motion and frame-by-frame playback.
Arranging the playback order of chapters or tracks.
How to select and program specific tracks.
Starting the playback sequence programmed via Program Play.
Playing tracks or chapters in a random order.
Various repeat modes like track, group, or all.
Repeating a specific segment of audio or video.
How to display and operate the on-screen bar.
Guide for singing along with karaoke discs.
Solutions for common system operation and setup issues.
Problems encountered during disc and file playback.
Specific issues related to playback of discs, files, and karaoke.
Troubleshooting for recording functions and timer settings.
To Next Page
