–19–
MasterPage: Body
Macintosh
7 Read the Software License Agreement
carefully and click [Continue].
8 Click [Agree] if you agree with the license
agreement.
Select a Destination screen appears.
9 Select the destination volume and click
[Continue].
Installation Type screen appears.
10Click [Upgrade] if you perform a basic
installation of the software.
● [Install] may be shown instead of [Upgrade].
Authenticate screen appears.
11Enter the Macintosh Administrator name
and password in [Name] and [Password]
respectively, and click [OK].
● When installing Capty MPEG Edit EX, this screen
will not be appeared if you are the owner.
Finish Up screen appears.
12Click [Close] after you will confirm the
message that tells you the installation has
been completed.
13Click [Close] when the installation is
finished and eject the CD-ROM.
M6_InstallGuide_Pal_001A_.book Page 19 Wednesday, February 1, 2006 3:54 PM
To Next Page
Loading...
