JVC HR-A60U User Manual

• Cassettes marked “VHS” (or “S-VHS”) can be used with this video
cassette recorder. However, S-VHS recording is not possible with
this model.
• This model is equipped with SQPB (S-VHS QUASI PLAYBACK)
that makes it possible to play back S-VHS recordings with
regular VHS resolution.
• HQ VHS is compatible with existing VHS equipment.
• As an Energy Star® Partner, JVC has determined that this
product or product model meets the Energy Star® guidelines for
energy efficiency.
VIDEO CASSETTE RECORDER
HR-A60U
INSTRUCTIONS
LPT0784-001A
COPYRIGHT © 2002 VICTOR COMPANY OF JAPAN, LTD.
Printed in Thailand
Dear Customer,
Thank you for purchasing the JVC VHS video cassette recorder.
Before use, please read the safety information and precautions to
ensure safe use of your new VCR.
CAUTIONS
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
UNIT TO RAIN OR MOISTURE.
CAUTION:
This video cassette recorder should be used with AC 120V~, 60Hz
only.
To prevent electric shocks and fire hazards, DO NOT use any other
power source.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG
TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME
LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
NOTE:
Changes or modifications not approved by JVC could void user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Failure to heed the following precautions may result in damage
to the VCR, Remote or video cassette.
1
DO NOT place the VCR . . .
...in an environment prone to extreme temperatures or humidity.
...in direct sunlight.
...in a dusty environment.
...in an environment where strong magnetic fields are generated.
...on a surface that is unstable or subject to vibration.
2.
DO NOT block the VCR’s ventilation openings.
3.
DO NOT place heavy objects on the VCR or on the Remote.
4.
DO NOT place anything which might spill on the top of the VCR
or on the Remote.
5.
AVOID violent shocks to the VCR during transport.
For Customer Use:
Enter below the Model No. and Serial No. which are located
on the rear of cabinet. Retain this information for future
reference.
Model No.
Serial No.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
J4F90401A
K
02/12
4F90401AE Cov-07 11/25/02, 03:01 PM1

JVC HR-A60U Specifications

General

Type	VCR
Video Format	NTSC
Usable Tape	T-120, T-160
Tape Width	1/2 inch
Power Source	AC 120V, 60Hz
Remote Control	Yes
On-Screen Display	Yes
Timer Recording	Yes
Recording Speed	SP, LP
Playback Speed	SP, LP
Video Recording System	Helical scan
Tuner	Built-in
Inputs	RF, Composite Video, Audio
Outputs	RF, Composite Video, Audio
Tape Speed	33.4 mm/s (SP), 16.7 mm/s (LP)
Head Type	4-head system

Summary

Safety and General Precautions

Electrical Safety Warnings

Covers shock hazards, not opening the unit, and proper plug usage.

Environmental and Usage Warnings

Addresses risks from rain, moisture, power sources, and placement.

FCC Compliance and Handling Notes

Details FCC rules, interference, and customer information.

Important Product Safety Instructions

Installation Guidelines

Covers grounding, power sources, ventilation, and mounting.

Antenna Installation Safety

Addresses grounding, lightning, and power line proximity for antennas.

Safe Usage Precautions

Details safe use regarding accessories, water, objects, cleaning, and heat.

Servicing and Damage Requirements

Outlines when to seek professional service for product damage.

Controls and Indicators Overview

Front Panel Controls and Indicators

Identifies buttons, ports, and indicators on the VCR's front.

Rear Panel Connectors

Lists and describes the input/output terminals on the VCR's rear.

Remote Control Usage Guide

Explains how to operate the VCR using the remote control.

Video Head Cleaning Procedure

Describes when and how to clean the VCR's video heads.

Remote, Display, and Connections

Remote Control Button Functions

Details the purpose of each button on the remote control.

On-Screen Display Information

Explains the information displayed on the TV screen by the VCR.

VCR Status Indicators

Describes the meaning of various status lights on the VCR.

RF and AV Connection Setup

Guides on connecting the VCR to the TV via RF and AV cables.

Initial Setup Procedures

VCR Channel Configuration

Steps to set the VCR channel for viewing broadcast TV.

Language and Clock Settings

Covers initial language selection and clock setup preparation.

Auto Clock Setting Details

Explains how the VCR automatically sets the internal clock.

Time Zone and Tuner Settings

Time Zone Selection

Guides on choosing the correct time zone for accurate clock function.

Manual Clock Configuration

Provides steps for manually setting the date and time.

TV/CATV Tuner Selection

Instructions for selecting between TV and CATV antenna modes.

Automatic Channel Scanning

Details how to scan for and preset TV channels.

Channel Management and Basic Playback

Manual Channel Management

Explains how to add or delete specific TV channels.

Loading and Starting Playback

Instructions for inserting a tape and beginning playback.

Playback Control Functions

Describes how to stop, pause, and manage playback.

Advanced Playback Features

Slow Motion and Speed Search

How to utilize slow-motion and speed search functions.

Tape Handling Operations

Covers rewind, fast-forward, eject, and power off functions.

Tracking Adjustment Guide

Explains manual tracking to improve picture quality.

Auto Repeat Playback Setup

How to enable automatic repeated playback of a tape.

Recording Basics and Timer Recording

Preparing for Recording

Covers loading cassettes, selecting channels, and tape speeds.

Recording Control Operations

Details how to start, pause, and stop recording.

Instant Timer Recording (ITR)

Guide on setting up timed recordings without prior programming.

Timer Recording Programming

Setting Timer Recording Programs

Step-by-step guide for programming unattended recordings.

Timer Recording Settings and Options

Covers correcting, confirming, canceling, and daily/weekly timers.

Timer Recording Notes and Other Functions

Program Overlap Management

Explains handling of conflicting timer recording schedules.

Blue Back and Stereo Features

Details the blue back screen and stereo broadcast recording.

Audio Output Selection Modes

Describes options for hearing stereo or mono audio.

Additional Functions and Editing

SAP and Daylight Saving Time

Covers Separate Audio Program and DST settings.

Editing and Dubbing Connections

Instructions for connecting VCRs for copying tapes.

Recording Input and Playback Setup

Steps for setting up recording from another VCR.

Troubleshooting and Problem Solving

Power and Reception Issues

Solutions for power, operation, and TV broadcast problems.

Recording and Playback Problems

Solutions for recording failures and playback issues like noise.

Remote and TV Selector Issues

Solutions for remote control malfunctions and TV selector problems.

Product Specifications

General and Video/Audio Specs

Details power, dimensions, signal systems, and audio ranges.

Tuner, Timer, and Accessories Specs

Covers channel coverage, timer capacity, and included items.

Service and Support

Finding a Service Center

Information on locating authorized JVC service centers.

Accessory Purchase and Servicing Warnings

Guidance on buying accessories and avoiding self-repair.

Warranty Information

Warranty Coverage and Service

Details the warranty period, what JVC covers, and service process.

Warranty Exclusions and Customer Data

Lists what the warranty does not cover and fields for customer details.