JVC HR-XVC25U - DVD Setup Language

38
Language
OSD Language English English
Francais
Espanol
Other
/Enter/Setup/Return
Picture ParentalSound
Language
OSD Language English
Other
/Enter/Setup/Return
Picture ParentalSound
4
Setting setup language
The setup language can be selected.
Press or ENTER and then
press
or to select desired
language (e.g. English), then
press ENTER.
2
Press SET UP MENU in the stop
mode. The SETUP MENU of
DVD will appear on the screen.
NOTE: To make the SETUP screen disappear, press SET UP
MENU (or RETURN).
If the DVD/VCR does not operate
properly: Static electricity, etc., may
affect the player's operation. Disconnect
the AC power cord once, then connect
it again.
3
Press or ENTER to select
“OSD Language”.
Then press
or to select
“Other”.
Language Other
/Enter/Setup/Return
Picture ParentalSound
1
Press DVD to select the DVD
mode. (The DVD indicator will
light.)
“No Disc” will appear on the
screen. (If a DVD disc has already
loaded, the playback will start
automatically.)
Turn ON the TV and set it to the video input mode.
Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
When using an amplifier, switch on the amplifier.
Preparation:
•
•
•
Reading