To Next Page
H
Holly TorresAug 20, 2025
Why is my JVC DVD VCR Combo remote not working?
- PPeter ParksAug 20, 2025
If your JVC DVD VCR Combo remote is not working, the batteries may be dead. Replace them with new ones.
Why is my JVC DVD VCR Combo remote not working?
If your JVC DVD VCR Combo remote is not working, the batteries may be dead. Replace them with new ones.
Why won't my JVC HR-XVC33U DVD VCR Combo play the disc?
There are several reasons why your JVC DVD VCR Combo might not play a disc: * The disc's region number might not match the unit. Try using discs with region numbers that include "ALL" or "1". * The disc type might be unplayable. Refer to the "Unplayable Discs" information. * The disc might not be placed correctly. Remove the disc and reinsert it properly into the tray. * The Parental Lock might be engaged at a level higher than the disc's rating. Either temporarily release the Parental Lock or adjust the set level.
How to fix timer recording not working on JVC DVD VCR Combo?
If timer recording is not working on your JVC DVD VCR Combo, it could be due to: 1. Incorrect clock or timer settings. Double-check and reset these settings. 2. The timer not being engaged. Press the TIMER button and ensure that the “#” symbol is displayed on the front panel.
What to do if recording cannot be started on JVC HR-XVC33U DVD VCR Combo?
If you cannot start recording on your JVC DVD VCR Combo, make sure that a cassette is loaded and that the record safety tab has not been removed. If the tab is removed, insert a new cassette, or using adhesive tape, cover the hole where the tab was removed.
What does it mean when '#', '' and '$' are blinking on my JVC HR-XVC33U?
If you see “#”, “”, and “$” blinking on the front display panel of your JVC DVD VCR Combo, it could mean one of two things: * The loaded cassette has had its record safety tab removed. Remove the cassette and cover the hole with adhesive tape, or insert a cassette with the record safety tab intact. * The end of the tape was reached during timer recording, so the program may not have been recorded in its entirety. Next time make sure you have enough time on the tape to record the entire program.
How to fix JVC HR-XVC33U when it has no power?
If your JVC DVD VCR Combo is not getting any power, the AC power cord might be disconnected. Make sure to connect the AC power cord.
Why can't I operate the VCR deck on my JVC HR-XVC33U DVD VCR Combo?
If you cannot operate the VCR deck on your JVC DVD VCR Combo, the VCR deck may not be selected. To select the VCR deck: - On the unit, press VCR/DVD repeatedly until the VCR indicator lights up. - On the Remote, press VCR so that the VCR indicator lights up.
Why is there no playback picture on my JVC HR-XVC33U DVD VCR Combo?
If you're not getting a playback picture on your JVC DVD VCR Combo while the tape is running: - If using an RF connection: Ensure the TV receiver’s channel selector is set to the VCR channel and that the unit’s VCR channel has been correctly set. - If using AV, S-VIDEO, or Component Video connection: Ensure the TV receiver is set to the AV mode.
How to fix noise during playback on JVC HR-XVC33U DVD VCR Combo?
If noise appears during normal playback on your JVC DVD VCR Combo, the automatic tracking mode may be engaged. Try manual tracking. (pg. 32)
Why are there breaks in the Hi-Fi soundtrack on my JVC DVD VCR Combo?
If you notice breaks in the Hi-Fi soundtrack on your JVC DVD VCR Combo, the automatic tracking mode may be engaged. Try manual tracking. (pg. 32)
General| Type | DVD VCR Combo |
|---|---|
| Brand | JVC |
| Model | HR-XVC33U |
| Video Format | NTSC |
| VHS Playback | Yes |
| VHS Recording | Yes |
| DVD Playback | Yes |
| DVD Recording | Yes |
| Remote Control | Yes |
| Recording Format | VHS |
| Playback Formats | VHS, DVD |
| Playable Disk Types | DVD, CD |
| Connectors | Composite video, S-Video, RF |
| Tuner | Built-in |
| Inputs | Composite video, S-Video, RF |
| Outputs | Composite video, S-Video |
