JVC HX-GD8 - Timer Operations: Setting Automatic Functions; Configuring Daily and Recording Timers; Step-by-Step Timer Setting Process

1-36 (No.MB188)
3.4 Speaker section
3.4.1 Removing the side panel assembly
(See Fig.1)
(1) From the side of the speaker main body, remove the four
screws A and two screws B attaching the side panel as-
sembly.
Fig.1
3.4.2 Removing the subwoofer
(See Fig.2)
• Prior to performing the following procedures, remove the side
panel assembly.
(1) Remove the six screws C attaching the subwoofer.
(2) From the back side of the subwoofer, disconnect the red
and black wires from the terminal.
Fig.2
A
A
BB
Side panel assembly
Black wire
Red wire
Terminal
C
C
Subwoofer