JVC HX-Z9V - Page 15

(No.22041)1-15
2.2.4 Removing the display system control board
(See Fig.33, 34)
(1) Remove the four screws U attaching the stay bracket (1).
(2) Disconnect the card wires from connector CN43 and
CN880 on the display system control board.
(3) Remove the ten screws V attaching the display system
control board.
Fig.33
Fig.34
CN880
Display system control board
CN43
U
Stay bracket (1)
CN880
Display system control board
CN43
V
V
V
V