JVC HX-Z9V - Page 16

1-16 (No.22041)
2.2.5 Removing the button board
(See Fig.35~39)
• Prior to performing the following procedure, remove the dis-
play system control board.
(1) Pull out preset knob, sound mode knob on the front panel
toward the front.
(2) Pull out the volume knob and remove the two screws W at-
taching the knob holder. Remove the nut from the front
panel.
(3) Remove the four screws X attaching the stay bracket (2).
(4) Remove the eight screws Y attaching the button board.
Fig.35
Fig.36
Fig.37
Fig.38
Fig.39
Front panel assembly
Volume knobPreset knob
Sound mode knob
W
Knob holder
Nut
X
Stay bracket (2)
Y
Y
Y
Button board