JVC In-Dash DVD Player KD-LX50R User Manual

32
ENGLISH
STOP
PLAY
What to do
Preset Operation Command list
Command
No.
1 POWER OFF Turn off the receiver.
(Power off)
2 ¢ SEEK • While playing a CD, change the track number in the
(Up) increasing order.
• While listening to the radio, change the frequencies
in the increasing order.
3 4 SEEK • While playing a CD, change the track number in the
(Down) decreasing order.
• While listening to the radio, change the frequencies
in the decreasing order.
4 EJECT (Eject) Eject the CD from the receiver if any.
5 NEXT (Next) • While playing the CD changer (not supplied), change
the CD number in the increasing order.
• While listening to the radio, change the preset
channel numbers in the increasing order.
6 BACK (Back) • While playing the CD changer (not supplied), change
the CD number in the decreasing order.
• While listening to the radio, change the preset
channel numbers in the decreasing order.
7 CD (CD) Change the source to CD.
8 CHANGER (Changer) Change the source to the CD changer if connected.
9 LINE-IN (Line in) Change the source to the external component.
10 FM (FM) Change the source to FM.
11 AM (AM) Change the source to AM.
12 VCR PLAY (Play)* Start playback on the VCR (KV-V10) if connected.
13 VCR STOP (Stop)* Stop playback on the VCR (KV-V10) if connected.
Voice Commands
(Words you speak for voice
demo)
* Used only when the external component is selected as the source.
EN30-47.KD-LX50R[E]/f 00.3.22, 10:36 AM32

JVC In-Dash DVD Player KD-LX50R Specifications

General

Brand	JVC
Model	In-Dash DVD Player KD-LX50R
Category	Car Receiver
Language	English