To Next Page
E
Elizabeth WilkersonSep 4, 2025
Why does my JVC KD-X50BT display 'NO FILE'?
- TTodd SloanSep 4, 2025
If your JVC Car Receiver displays 'NO FILE', verify that the selected folder, connected USB device, or iPod/iPhone contains a playable file.
Why does my JVC KD-X50BT display 'NO FILE'?
If your JVC Car Receiver displays 'NO FILE', verify that the selected folder, connected USB device, or iPod/iPhone contains a playable file.
What to do if my JVC Car Receiver unit does not work at all?
If your JVC Car Receiver unit isn't working, try resetting it.
Why is sound being interrupted or skipped during playback of a Bluetooth audio player on my JVC Car Receiver?
If the sound is being interrupted or skipped during playback from a Bluetooth audio player on your JVC Car Receiver, try reducing the distance between the unit and the Bluetooth audio player. You can also try turning the unit off and then on again, then attempt to reconnect. Another possibility is that other Bluetooth devices might be trying to connect to the unit.
How to stop echo or noise on JVC Car Receiver?
If you are experiencing echo or noise with your JVC Car Receiver, adjust the microphone unit’s position. You can also adjust the and settings to find a better combination.
How to fix SSM automatic presetting that does not work on JVC Car Receiver?
If SSM automatic presetting does not work on your JVC Car Receiver, store stations manually.
Why does my JVC KD-X50BT display 'STATION REACH LIMIT'?
If your JVC Car Receiver displays 'STATION REACH LIMIT', it means you have created the maximum allowed number of 100 stations.
Why does 'READING' keep flashing on the display of my JVC KD-X50BT?
If 'READING' keeps flashing on the display of your JVC Car Receiver, it indicates that a longer readout time is required. Also, avoid using too many hierarchical levels and folders.
What does “SET UP PANDORA ON YOUR DEVICE” mean on JVC Car Receiver?
Pandora setup is not completed. Connect the iPod/iPhone to this unit after completing the setup in your iPod/iPhone.
Why “NO FILE” appears on JVC Car Receiver display?
If “NO FILE” appears on the display of your JVC Car Receiver, check whether the selected folder, the connected USB device, or the iPod/iPhone contains a playable file.
What does it mean when 'PAIRING FULL' scrolls on the display of my JVC KD-X50BT when trying to pair a device?
If 'PAIRING FULL' is displayed on your JVC Car Receiver when you attempt to pair a device, it means you have reached the maximum limit of five registered Bluetooth devices. To pair a new device, you must first delete one of the existing paired devices from the unit.
Overview of control panel and remote buttons and their functions.
Install and connect the Bluetooth adapter and pair devices.
Handle incoming calls, make calls, use voice recognition, and manage phone settings.
Navigate and configure various unit settings through the menu system.
Solutions for common problems across radio, USB, iPod, Bluetooth, and unit functions.
General| MP3 playback | Yes |
|---|---|
| CD-R playback | No |
| Audio formats supported | MP3, WAV, WMA |
| Tuner type | HS-IVi |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | FM, LW, MW |
| Preset stations quantity | 24 |
| Product color | Black |
| Line outputs (RCA) | 2 |
Weight and Dimensions| Weight | 900 g |
|---|
