N
ngatesAug 25, 2025
What to do if my JVC Car Receiver unit does not work at all?
- AAnna GarnerAug 25, 2025
If your JVC Car Receiver unit isn't working, try resetting it.
To Next PageTo Next Page
What to do if my JVC Car Receiver unit does not work at all?
If your JVC Car Receiver unit isn't working, try resetting it.
What to do if my JVC KD-X50BT has no sound, sound is interrupted, or there's static noise?
If you are experiencing no sound, interrupted sound, or static noise with your JVC Car Receiver, check the cords, antenna, and cable connections. Also, verify the condition of the connected device and the recorded tracks. When connecting to an external component, ensure you are using the recommended stereo mini plug.
Why does my JVC Car Receiver say 'NOT SUPPORT' when trying to perform voice dial?
If your JVC Car Receiver displays 'NOT SUPPORT' when attempting a voice dial, it means the connected phone does not support this feature.
What to do if the unit does not respond when copying the phonebook to my JVC KD-X50BT Car Receiver?
If the unit does not respond when you try to copy the phonebook to your JVC Car Receiver, it may be because you are trying to copy the same entries already stored in the unit. Press DISP or ? to exit.
What does 'HW ERROR' mean on my JVC KD-X50BT Car Receiver and what should I do?
If 'HW ERROR' appears on the display of your JVC Car Receiver, reset the unit and try the operation again.
Why does my JVC KD-X50BT Car Receiver display 'ERROR CNNCT'?
If your JVC Car Receiver displays 'ERROR CNNCT', it means the device is registered but the connection has failed. Try connecting the device manually.
What does 'PLEASE WAIT' mean on my JVC KD-X50BT display?
If 'PLEASE WAIT' appears on the display of your JVC Car Receiver, it indicates that the unit is preparing to use the Bluetooth function. If the message persists, turn the unit off and then on again, and reconnect the device. You can also try resetting the unit.
What to do if my JVC Car Receiver displays 'ERROR'?
If 'ERROR' appears on the display of your JVC Car Receiver, try the operation again. If the error persists, check if the device supports the function you are trying to use.
Why can't I select a source on my JVC KD-X50BT Car Receiver?
If you cannot select a source on your JVC Car Receiver, check the setting.
Why does my JVC KD-X50BT display 'NO FILE'?
If your JVC Car Receiver displays 'NO FILE', verify that the selected folder, connected USB device, or iPod/iPhone contains a playable file.
General| MP3 playback | Yes |
|---|---|
| CD-R playback | No |
| Audio formats supported | MP3, WAV, WMA |
| Tuner type | HS-IVi |
| FM band range | 87.5 - 108 MHz |
| LW band range | 153 - 279 kHz |
| Supported radio bands | FM, LW, MW |
| Preset stations quantity | 24 |
| Product color | Black |
| Line outputs (RCA) | 2 |
Weight and Dimensions| Weight | 900 g |
|---|
Overview of control panel and remote buttons and their functions.
Install and connect the Bluetooth adapter and pair devices.
Handle incoming calls, make calls, use voice recognition, and manage phone settings.
Navigate and configure various unit settings through the menu system.
Solutions for common problems across radio, USB, iPod, Bluetooth, and unit functions.
