EasyManua.ls Logo

JVC JA-S77 Service Manual

JVC JA-S77
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the JVC JA-S77 and is the answer not in the manual?

JVC JA-S77 Specifications

General IconGeneral
TypeStereo Integrated Amplifier
Power Output80 watts per channel into 8Ω (stereo)
Frequency Response5Hz to 100kHz
Input Sensitivity2.5mV (MM), 150mV (line)
Speaker load impedance4Ω to 16Ω
Channel Separation60dB (line)
Output150mV (line)

Summary

1. Specifications

Power Amplifier Specifications

Output power, total harmonic distortion, intermodulation distortion, and frequency response.

Pre-Amplifier Specifications

Input sensitivity, impedance, phono overload, and signal-to-noise ratio for pre-amp section.

Controls and Tone Specs

Details on loudness control, tone controls, and filter specifications.

Power, Dimensions, Weight

Power source, consumption, physical dimensions, and unit weight.

2. Block Diagram

Overall Signal Flow Diagram

Visual representation of signal paths and main functional blocks within the amplifier.

3. Disassembly Procedures

Top Cover and Bottom Plate Removal

Step-by-step instructions for removing the unit's top cover and bottom plate.

4. Main Parts Location and Identification

Top View Component Identification

Identification and location of major internal components viewed from the top.

Bottom View Component Identification

Identification and location of major internal components viewed from the bottom.

5. Exploded Views and Parts Lists

Front Panel Exploded View and Parts

Exploded view illustrating the front panel assembly and its constituent parts.

5. Exploded Views and Parts Lists

Rear Panel Exploded View and Parts

Exploded view illustrating the rear panel assembly and its constituent parts.

5. Exploded Views and Parts Lists

Heat Sink and Power Transistor Exploded View

Exploded view detailing the heat sink and power transistor components.

6. Adjustment Procedures

Main Amplifier Center Voltage Adjustment

Procedure for setting the center voltage of the main amplifier section.

Main Amplifier Idling Current Adjustment

Procedure for setting the idling current of the main amplifier section.

6. Adjustment Procedures

Power Meter and Equalizer Amp. Adjustment

Procedures for adjusting the power meter sensitivity and equalizer amplifier center voltage.

7. Printed Circuit Board Assemblies and Parts

TPS-59D AC Fuse PCB and Parts List

Details of the TPS-59D AC Fuse PCB, including its part numbers and descriptions.

7. Printed Circuit Board Assemblies and Parts

TXX-109 Driver Amp. PCB Layout and Parts

Diagram and component identification for the TXX-109 Driver Amplifier PCB.

7. Printed Circuit Board Assemblies and Parts

TXX-110 Tone Control PCB Layout and Parts

Diagram and component identification for the TXX-110 Tone Control PCB.

7. Printed Circuit Board Assemblies and Parts

TXX-111 Equalizer Amp. PCB Layout and Parts

Diagram and component identification for the TXX-111 Equalizer Amplifier PCB.

8. Packing Materials and Part Numbers

Packing Material Identification

List of materials used for packing the unit, with associated part numbers.

9. Accessories List

Included Accessories List

List of accessories provided with the amplifier, including their part numbers and descriptions.

11. Parts List with Specified Numbers for Designated Areas

Regional Parts Variations and Cross-Reference

Cross-reference of parts based on geographical region, detailing applicable part numbers.

10. Schematic Diagrams

Regional Power Supply Schematic Variations

Circuit diagrams illustrating power supply configurations for USA, Canada, Europe, and UK.

10. Schematic Diagrams

Continued Regional Schematic Variations

Further details on circuit diagrams for Australian and UK power supply configurations.

Related product manuals