
Do you have a question about the JVC KS-AR7002J and is the answer not in the manual?
| Amplifier Class | AB |
|---|---|
| Number of Channels | 2 |
| RMS Power at 4 Ohms | 70W x 2 |
| RMS Power at 2 Ohms | 100W x 2 |
| Bridged RMS Power at 4 Ohms | 200W x 1 |
| Frequency Response | 5Hz - 50kHz |
| Signal-to-Noise Ratio | 90 dB |
| THD at 4 Ohms | 0.08% |
| Power Output | 200W |
| Crossover | 50 - 200 Hz |
Detailed specifications for the KS-AR7002 model.
Detailed specifications for the KS-AX5602 model.
Caution about burrs on chassis during repair.
Disassembly procedures for the main unit, using KS-AR7002 as reference.
Step-by-step guide to remove the bottom cover of the unit.
Instructions for removing the crossover board assembly.
Instructions for removing the LED board assembly.
Instructions for removing the illuminator LED board assembly.
Instructions for removing the main board assembly.
Visual guide showing assembly and part identification.
List of parts for the general assembly, including part numbers and descriptions.
List of electrical components for the main circuit board.
List of electrical components for the PWM-C circuit board.
List of electrical components for the Sub1 circuit board.
List of packing materials and included accessories.
High-level overview of the audio amplifier's functional blocks.
Detailed circuit diagrams for the audio sections.
Schematic for the input, crossover, and front-end circuitry.
Schematic for the power supply and output stages.
Layout diagrams for the forward and reverse sides of the main PCB.
Layout diagrams for the forward and reverse sides of the sub PCB.
Layout diagrams for the forward and reverse sides of the PWM PCB.
Loading...