JVC KS-AX6700 - User Manual

SERVICE MANUAL
KS-AX6700KS-AX6700
No. 49559
Jun. 2000
KS-AX6700
POWER AMPLIFIER
Printed in Japan
200006(S)
(No. 49559)
Contents
Safety Precaution
Location of main parts
Removal of main parts
Adjustment method
Wire connection diagram
1-2
1-3
1-5
1-8
1-9
VICTOR COMPANY OF JAPAN, LIMITED
MOBILE ELECTRONICS DIVISION
PERSONAL & MOBILE NETWORK B.U. 10-1,1Chome,Ohwatari-machi,Maebashi-city,Japan
COPYRIGHT 2000 VICTOR COMPANY OF JAPAN, LTD.
This service manual is printed on 100% recycled paper.
Areas suffix
Caution
If electricity is connected during disassembly, it must be a no load current. If it is load
current, be sure to attach a heat sink to the power-amp IC. This will be damaged if the
above precautions are not followed, as it does not have a sub heat sink attached to it.
J -------- Nothem America
E ----- Continental Europe

JVC KS-AX6700 Specifications

General

Brand	JVC
Model	KS-AX6700
Category	Amplifier
Language	English

Summary

Removal of Main Parts

Removing the Bottom Cover

Procedure for removing the bottom cover using screws A and B.

Removing the Main P.C. Board

Steps to detach the control panel and remove the main P.C. board.

Removing the CCFL Board

Instructions for removing the CCFL board and its cover.

Standard Schematic Diagrams

Main Board [2;2] and CCFL Board Circuit Diagram

Circuit diagram for the main board (part 2) and CCFL board.

Printed Circuit Boards

Main Board Layouts

Surface and bottom side views of the main printed circuit board.

Sub1;Sub2 and CCFL P.C. Board Layouts

Layout diagrams for Sub1/Sub2 (Volume) and CCFL printed circuit boards.

Parts List

Enclosure Assembly Parts List

Exploded view of the unit's enclosure with a list of its assembly parts.

Electrical Parts List

Comprehensive list of electrical components for the main and other PCBs.

Packing and Accessories List

Details on packaging contents and included accessories.